Related Manuals for Kramer RC-IR1
Summary of Contents for Kramer RC-IR1
-
Page 1: User Manual
Kramer Electronics, Ltd. USER MANUAL Models: RC-IR1 / IR-1 / IR-1-01 Infra-Red Remote Control Device Remote Control Transmitter Remote Receiver... -
Page 2: Table Of Contents
Contents Contents Introduction Getting Started Overview Your Remote Control Transmitters (IR-1 / IR-1-01) Your Remote Receiver Identifying the Built-in Remote Receiver Connecting the External Remote Receiver Configuration Setting the Group # Setting the Unit # Using the Remote Control Transmitters (IR-1 / IR-1-01) Understanding the Remote Control Transmitters (IR-1 / IR-1-01) 7.1.1 Differences between the IR-1 and the IR-1-01... - Page 3 Figure 4: Controlling the VP-25xl Scaler functionality via the IR-1 / IR-1-01 Tables Table 1: Remote Control Transmitter Features (IR-1 and IR-1-01) Table 2: Group Definition Specifications Table 3: Technical Specifications of the IR-1 and the IR-1-01 KRAMER: SIMPLE CREATIVE TECHNOLOGY...
-
Page 4: Introduction
3 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com/manuals.html 4 For example, when ordering an IR-1-01 remote control transmitter, order an external remote receiver to control Kramer switchers—such as the VS-1002, VS-1202, VS-1602, and VS-1604—that have no built-in remote receiver 5 It includes an attached RS-232 cable with a DB9 connector, and comes with a 12V DC power adapter 6 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com (click “Cables and Connectors”... -
Page 5: Overview
• Have their own hand held wireless remote control transmitter that includes the protocols of all Kramer devices and is programmable to control any Kramer machine (see Figure 1) • Transmit to an identical remote receiver, either built-in (see Figure 2) or external (see Figure 3). -
Page 6: Your Remote Control Transmitters (Ir-1 / Ir-1-01)
Your Remote Control Transmitters (IR-1 / IR-1-01) Your Remote Control Transmitters (IR-1 / IR-1-01) Figure 1 and Table 1 define the IR-1 and the IR-1-01 remote control transmitters , which require no connection (just insert the battery): Figure 1: Remote Control Transmitters (IR-1 and IR-1-01) 1 Items 17, 18, and 19 of the IR-1-01 remote control transmitter let you route up to 96 x 96 inputs/outputs, as well as store/recall up to 99 configuration setups with some of our advanced switchers (for the complete list, see Group 20 in Table 2) -
Page 7: Table 1: Remote Control Transmitter Features (Ir-1 And Ir-1-01)
4 For example, say you want to increase the volume, but instead of pressing SHIFT + 17, you press SHIFT + 20, in error, you can press ESC (clearing the 20) and then 17 5 This feature will be available in future versions 6 To adjust the volume on the VP-25xl, see section 7.4.1 KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 8: Your Remote Receiver
When ordering a IR-1-01 remote control transmitter, a separate order must be made for an external remote receiver if you want to use the IR-1-01 to control a Kramer switcher that has no built-in remote receiver—such as the VS-1002,... -
Page 9: Figure 3: Connecting The External Remote Receiver
1 For example, with the VP-81 2 For example, vertical interval matrix switchers for composite video and stereo audio signals 3 For example, the VS-808xl and the VS-606xl KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 10: Configuration
Configuration Configuration Kramer products are arranged in groups. Each group is controlled by a different protocol . To use the IR-1 and/or IR-1-01 you need to manually allocate each unit you want to control to its group. Allocating the units in this way enables the IR-1 and/or IR-1-01 to communicate with each unit in the system. -
Page 11: Table 2: Group Definition Specifications
* Use a cross connection (or Null-modem adapter), as section 5.2 describes 1 Old protocol 2 New Kramer Protocol-2000 (version 3.1) 3 When operating the VS-1211 unit, in Group 12 (but not Group 15), press the (input) # key twice... -
Page 12: Using The Remote Control Transmitters (Ir-1 / Ir-1-01)
Using the Remote Control Transmitters (IR-1 / IR-1-01) Using the Remote Control Transmitters (IR-1 / IR-1-01) This section describes how to use the IR-1 and IR-1-01 remote control transmitters. 7.1 Understanding the Remote Control Transmitters (IR-1 / IR-1-01) This section includes details of the: •... -
Page 13: Using The <-> Single Digit Mode To Select 10 Via The <0/10> Key
2. Prepare the set of codes for switching (see section 7.2). 3. Press the TAKE key again. The TRANS LED lights. The data transmits to the unit(s). 1 See the example in section 7.2.2 2 See items 7, 8 and 9 in Figure 1 KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 14: Switching An Input To An Output (Ir-1 / Ir-1-01)
Using the Remote Control Transmitters (IR-1 / IR-1-01) 7.2 Switching an Input to an Output (IR-1 / IR-1-01) To switch an input to an output: • Using the IR-1, see section 7.2.1 • Using the IR-1-01, see section 7.2.2 7.2.1 Switching an Input to an Output via the IR-1 (except for Group 20) To switch an input to an output, using the IR-1, do the following: 1. -
Page 15: Storing/Recalling A Setup (Ir-1 / Ir-1-01)
1. Point the remote control transmitter at the remote receiver and press the SHIFT key. The TRANS LED lights. 2. Press the RCL key. The TRANS LED lights. 3. Press the setup # key. The TRANS LED lights. The memory recalls the stored data. KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 16: Recalling A Setup Using The Ir-1-01
Using the Remote Control Transmitters (IR-1 / IR-1-01) 7.3.2.2 Recalling a Setup using the IR-1-01 To recall a setup (for example, setup # 7) using the IR-1-01 for a series 16x16 matrix switcher that is allocated to Group 20, press: •... -
Page 17: Controlling The Scaler Leds And Buttons Of The Vp-25Xl
Point the remote control transmitter at the remote receiver and press the keys 5 and then 2 to cycle between the Output LEDs (with INPUT CV or Y/C) 1 H Phase, Hue, Color, V Pos, Bright and/or Contrast KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 18: Selecting A Process
Technical Specifications 7.4.2.3 Selecting a Process To select a Process , do the following: • Point the remote control transmitter at the remote receiver and press the keys 5 and then 3 to cycle between the 6 process LEDs 7.4.2.4 Increasing the Process level To increase the Process level, do the following: •... - Page 19 EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
- Page 20 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com. Updates to this user manual may be found at http://www.kramerelectronics.com/manuals.html. We welcome your questions, comments and feedback. Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.com...
Need help?
Do you have a question about the RC-IR1 and is the answer not in the manual?
Questions and answers