Adjusting Coffee Strength; Adjusting Grinder Settings - Philips EP4051 User Manual

Adjusting coffee strength

1
2
3
4
5

Adjusting grinder settings

1
2
2 Press the OK button when the cup contains the desired amount of
espresso.
-
The tick on the display shows that the button is programmed: every
time it is pressed, the machine brews the set espresso volume.
Note: To set the volume of espresso lungo, cappuccino, café au lait and latte
macchiato, follow the same procedure: press and hold the button of the
beverage and press the OK button when the cup contains the desired
amount of coffee or milk. Make sure that the milk carafe is in place and that
the milk spout is open.
To change the coffee strength, press the AROMA STRENGTH button. Each
time you press the AROMA STRENGTH button, the aroma strength changes
by one degree. The display shows the chosen strength, which is only saved
if you brew a coffee.
1 Very mild
2 Mild
3 Regular
4 Strong
5 Very strong
Note: After adjusting the coffee strength, the display shows the main menu
again and saves the chosen aroma strength when you brew a coffee.
You can adjust the grinder settings by using the grind setting knob inside the
bean container.
Note: You can only adjust the grind settings when the machine is grinding
coffee beans.
Caution: Do not turn the grind setting knob more than one notch at a time to
prevent damage to the grinder.
1 Place a cup under the coffee dispensing spout.
2 Open the lid of the bean hopper.
3 Press the ESPRESSO button.
4 When the grinder starts grinding, press down the grind setting knob and
turn it to the left or right.
- There are 5 different grind settings you can choose from. The lower the
setting, the stronger the coffee.
English
13