Bluetooth Operation - Blaupunkt LS 181 Instruction Manual

LS 181

BLUETOOTH OPERATION

You can listen to tracks from a media device if it is connected to the unit via Bluetooth.
Pair Bluetooth-enabled Devices
You need to pair your Bluetooth device with this unit before you connect them for the first
time.
Note:
- The operational range between this unit and a Bluetooth device is approximately 8
meters (without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure that you know the device's
capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and the Bluetooth device can reduce the operational
range.
- If the signal strength is weak, your Bluetooth device may disconnect, but it will re-enter
automatically into pairing mode.
1. During ON mode, press repeatedly the SOURCE button on the unit (or press the BT
button on the remote control) to select the Bluetooth mode. If the unit is not paired to any
Bluetooth device, the system enters automatically into pairing mode; or you need to
press the PAIR button to start pairing.
2. Activate the Bluetooth function on your device and select the search mode.
"BLAUPUNKT LS1 81 " will appear on your Bluetooth device.
3. Select "BLAUPUNKT LS 181 " in the pairing list. After successful pairing, the
AUX/Bluetooth indicator will light up steadily.
Tips:
• Enter "0000" for the password if necessary.
• If there is already an existing connection, press the PAIR button on the remote control
(or press and hold the /PAIR button on the main unit) to re-activate the pairing mode.
The existing connection will be interrupted and the BLUETOOTH indicator will flash.
• If no other Bluetooth device pairs with this unit within two minutes, the unit will restore
its previous connection.
• The unit will also be disconnected when your device is moved beyond the operational
range.
• If you want to reconnect your device to this unit, place it within the operational range.
• If the device is moved beyond the operational range, when it is brought back, please
check if the device is still connected to the unit.
• If the connection is lost, follow the above instructions to pair your device again to this
unit.
Listen to Music from a Bluetooth Device
• If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the device through this unit speakers.
• If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the
player's remote control to play music stored on the device.
1. Pair your device with this unit.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the button.
- To skip to a track, press the / buttons.
47