Flash Sync Mode - Hasselblad H6D User Manual

View camera connectivity

FLASH SYNC MODE

Camera: A View Camera with an H System magazine interface
that is fitted with mechanical shutter lens.
Procedure:
1 Detach the Sensor Unit from the H6D camera body. Be
careful not to damage the IR filter in front of the sensor.
2 Attach the Sensor Unit to the View Camera. Follow
instructions from the manufacturer.
3 Connect the supplied Flash Sync input cable between the
flash sync port of the lens and the flash sync input (A) on the
Sensor Unit.
4 Connect external power to the DC input socket (B). The
Sensor Unit will automatically start.
5 From the Camera Menu, select Camera Body. In the pop-up,
select "Flash Sync". Press Menu button or tap outside pop-
up to save and close.
6 When the LED on the Sensor Unit is green, the Sensor Unit
is ready for a capture. If it is orange, click any of the buttons
below the display to activate the Sensor Unit before capture.
7 Exposure parameters (Aperture and Shutter Speed) are set
on the lens and cannot be set on the Sensor Unit.
Control Screen
In Flash Sync Mode, the Control Screen has fewer items than
when used on an H camera. From this screen you can change:
●
White Balance
●
ISO
●
Exposure Mode (Manual or Video)
You can also start Live View by tapping the "LV" icon (C). Note
that the lens must be open for Live View.
H6D
Camera Body Settings Menu
Flash Sync and Power Connections
Control Screen in Flash Sync mode
C
Flash Sync
Flash Sync Connection
USER GUIDE
A
B
ISO
www.hasselblad.com
164