Yanmar 6LPA-STP2 Operation Manual page 28

PRODUCT OVERVIEW
Alarms
Check that indicators and alarms are working normally when the key is turned to ON.
Key Switch
Engine
Alarm
Indicators
Key (Starter) Switch
(2)
(1)
Figure 14
The GLOW position (Figure 14, (1)) is the
start aid position. Electric current to the air
heater (if equipped) is turned on.
The START position (Figure 14, (4)) allows
current to the starting motor. When starting
the engine, move the key to the START
position and release. The key will
automatically move to the ON position.
NOTICE: NEVER hold the key in the
START position for longer than 15
seconds or the starter motor will
overheat.
22
Battery Low Charge Indicator
Fresh Water (Coolant) High Temperature
Indicator
Engine (Lube) Oil Low Pressure Indicator
Fresh Water (Coolant) Level Indicator
Fuel Filter (Water Separator) Indicator
Exhaust (Cooling Seawater Flow) Restriction
Indicator
Gear Oil Level (6LPA-STZP2 Only)
(3)
(4)
0003622
© 2007 Yanmar Marine International
OFF ⇒ ON
Before starting
ON
ON
OFF
ON
OFF
OFF
ON
OFF
When the key is in the OFF position
(Figure 14, (2)) the electric current is off.
The key can be inserted or removed in this
position.
The ON position (Figure 14, (3)) allows
electrical current to the controls and
equipment and allows the engine to keep
running. To stop the engine, keep the key
switch in the ON position and push the
engine stop button. After stopping the
engine, turn key to OFF position.
6LPA Series Operation Manual
START ⇒ ON
Running
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF