Yanmar 6LPA-STP2 Operation Manual page 12

SAFETY
WARNING
!
Piercing Hazard
Avoid skin contact with high-
pressure diesel fuel spray
caused by a fuel system leak
such as a broken fuel injection
line. High-pressure fuel can
penetrate your skin and result in serious
injury. If you are exposed to high-pressure
fuel spray, obtain prompt medical treatment.
NEVER check for a fuel leak with your
hands. ALWAYS use a piece of wood or
cardboard. Have your authorized Yanmar
Marine dealer or distributor repair the
damage.
Burn Hazard
Some of the engine surfaces
become very hot during
operation and shortly after
shut-down. Keep hands and
other body parts away from
hot engine surfaces.
Sudden Movement Hazard
ALWAYS stop the engine before beginning
service.
Exhaust Hazard
NEVER block windows, vents
or other means of ventilation if
the engine is operating in an
enclosed area. All internal
combustion engines create
carbon monoxide gas during operation and
special precautions are required to avoid
carbon monoxide poisoning.
6
The safety messages that follow have
CAUTION level hazards.
Ensure that the work area is adequately
illuminated. ALWAYS install wire cages on
portable safety lamps.
ALWAYS use tools appropriate for the task
at hand and use the correct size tool for
loosening or tightening engine parts.
ALWAYS wear eye protection when
servicing the engine or when using
compressed air or high-pressure water.
Dust, flying debris, compressed air,
pressurized water or steam may injure your
eyes.
flush eyes and wash immediately with clean
water.
6LPA Series Operation Manual
© 2007 Yanmar Marine International
CAUTION
!
Poor Lighting Hazard
Tool Hazard
Flying Object Hazard
Coolant Hazard
Wear eye protection and
rubber gloves when you
handle Long Life engine
coolant. If contact with the
eyes or skin should occur,