Port Mapping - Planet VDR-301n User Manual

User Name
Password
Debug
Show Message
CPE sends GetRPC
Skip MReboot
Delay
Auto-Execution

5.4.5 Port Mapping

The VDR-301N provides multiple interface groups. Up to five interface groups are supported including one default
group. The LAN and WAN interfaces could be included. Traffic coming from one interface of a group can only be
flowed to the interfaces in the same interface group. Thus, the VDR-301N can isolate traffic from group to group
for some applications. By default, all the interfaces (LAN and WAN) belong to the default group, and the other four
groups are all empty. It is possible to assign any interface to any group but only one group.
The connection username provided by TR-069 service.
The connection password provided by TR-069 service.
Select Enable to display ACS SOAP messages on the serial console.
Select Enable to enable the router to contact the ACS to obtain
configuration updates.
Specify whether to send an MReboot event code in the inform
message.
Specify whether to start the TR-069 program after a short delay.
Specify whether to automatically start the TR-069 after the router is
powered on.
Figure 5-56 Port Mapping
76
User Manual of VDR-301N