Table of Contents
Advertisement
Available languages
Available languages
Table of Contents
1.
delivery) ................................ 18
2.
Please Read First! ................. 19
3.
Safety ..................................... 19
3.1
Specified conditions of use.......19
3.2
General Safety Instructions.......19
3.3
Symbols on the machine ..........21
3.4
Safety Devices..........................21
4.
Installation and Transport.... 22
4.1
Installation ................................22
4.2
4.3
Transport ..................................22
5.
Special Product Features..... 22
6.
Initial Operation..................... 23
6.1
Installing the chip bag ...............23
6.2
Installing the work clamp ..........23
6.3
Mains connection .....................23
7.
Operation ............................... 23
7.1
Using the laser guide ................24
7.2
Mitre Cuts .................................24
7.3
Bevel Cuts ................................24
7.4
Compound mitre cuts ...............25
7.5
cuts...........................................25
8.
Care and maintenance.......... 25
8.1
Saw Blade Change ...................25
8.2
Replacing the table insert .........26
8.3
Drive belt tensioning .................27
8.4
Adjustments..............................27
8.5
clamp........................................28
8.6
carbon brushes.........................28
8.7
Cleaning the machine ...............28
8.8
Storage.....................................29
8.9
Maintenance.............................29
9.
Tips and Tricks ...................... 29
10.
Available Accessories ..... 29/62
11.
Repair ..................................... 29
12.
Environment .......................... 29
13.
Trouble Shooting .................. 30
14.
Technical Data....................... 30
2.
Please Read First!
These instructions have been written in
a way which facilitates learning of how
to operate your saw safely. These in-
structions should be used as follows:
- Read instructions before use. Pay
special attention to the safety infor-
mation.
- These operating instructions are in-
tended for people with basic techni-
cal knowledge regarding the operati-
on of a machine like the one
described in these instructions. If
you have no experience
whatsoever, you are strongly advi-
sed to seek competent advise and
guidance from an experienced per-
son before operating this machine.
- Keep all documents supplied with
the tool so that you and all other
users can access them at any time.
Retain proof of purchase in case of
warranty claims.
- If you lend or sell this machine be
sure to have all machine documents
supplied go with it.
- The equipment manufacturer is not
liable for any damage resulting from
neglect of these operating instruc-
tions.
Information in this manual is denoted as
under:
A
Danger!
Risk of personal injury or environmental
damage.
B
Risk of electric shock!
Risk of personal injury by electric shock.
c
Drawing-in/trapping hazard!
Risk of personal injury by body parts or
clothing being drawn into the rotating
saw blade.
A
Caution!
Risk of material damage.
3
Note:
Additional information.
- Numbers in illustrations (1, 2, 3 etc.)
- indicate component parts;
- are consecutively numbered;
ENGLISH
- relate to the corresponding num-
ber(s) in brackets (1), (2), (3) etc.
in the neighbouring text.
- Numbered steps must be carried out
in sequence.
- Instructions which can be carried out
in any sequence are marked with a
bullet (•).
- Listings are indicated by an En Dash
(-).
3.
Safety
3.1
Specified conditions of
use
This saw can be used for making rip
and cross cuts, bevel cuts, mitre cuts
and compound mitre cuts.
Work only materials suitable for cutting
by the saw blade fitted (see 'Technical
Data' for available saw blades).
Do not cut workpieces unless they con-
form to the permissible dimensions (see
section 'Operation').
Stock having a round or irregular cross
section (such as firewood) must not be
cut as it cannot be securely held during
cutting. When sawing thin stock layed
on edge, a suitable auxiliary fence must
be used for firm support.
Any use other than the use specified
above is not allowed. Unspecified use,
modifications to the machine, or use of
parts not tested and approved by the
equipment manufacturer may cause un-
foreseeable damage!
3.2
General Safety Instruc-
tions
Please also observe the separate
document 'Safety instructions'!
When using this machine observe
the following safety instructions, to
minimize the risk of personal injury
or material damage.
Please also observe the special sa-
fety instructions in the respective
sections.
Where applicable, follow the legal
directives or regulations for the pre-
vention of accidents pertaining to
the use of crosscut saws.
19
Advertisement
Chapters
Table of Contents
