Resetting the Standard Product Defaults
If you are unsure of what programming options are in your scanner, or you've
changed some options and want the factory settings restored, scan the
dard Product Default Settings
uration for the currently active interface to the current configuration.
The programming section lists the factory default settings for each of the menu
commands for the standard RS-232 interface in
pages. Exceptions to default settings for the other interfaces can be found in
Appendix D, Factory Default
Data Matrix Programming Labels
Some scanners can be configured using Data Matrix programming labels. This
feature is ONLY available for scanners with 2D capability.
Contact Technical Support to request Data Matrix programming labels.
12
bar code below. This will copy the factory config-
Standard Product Default Settings
Settings.
text on the following
BOLD
Magellan™ 3300HSI
Stan-