Datalogic Magellan 3300HSi Product Reference Manual page 82

Keyboard Wedge (continued)
Wedge Quiet Interval
NOTE
Quiet Interval is the amount of time to look for keyboard activity before the
scanner breaks the keyboard connection in order to transmit data to the host.
START / END
Selectable from 001 to 100 in 10 msec increments. To configure this feature, scan the "START/END" bar
code above to place the unit in Programming Mode, then the Set Wedge Quiet Interval bar code fol-
lowed by the three digits (zero padded) from the Alphanumeric table in Appendix C, representing your
desired length. Exit programming mode by again scanning the "START/END" bar code above.
74
This feature does not apply to the USB Keyboard
interface.
PROGRAMMING bar codes
DEFAULT SETTING FOR THIS FEATURE:
010 (100 msec)
Set Wedge Quiet Interval
Magellan™ 3300HSI