Connecting The Connection Cord - Samsung AC***KNLDCH User & Installation Manual

Connecting the connection cord

the electric connections.
The indoor unit is powered by the outdoor unit by means of a H07 RN-F connection cable (or a more power model),
with insulation in synthetic rubber and jacket in polychloroprene(neoprene), in accordance with the requirements of standard EN 60335-2-40.
1. Remove the screw on the electrical component box and remove the cover plate.
2. Route the connection cord through the side of the indoor unit and connect the cable to terminals; refer to the fi gure below.
3. Route the other end of the cable to the outdoor unit through the ceiling & the hole on the wall.
4. Reassemble the electrical component box cover, carefully tightening the screw.
Wiring diagram
1 phase
Indoor Unit
2(N) 1 2
1(L)
L1 L2
1(L) 2(N) L N
L1 L2 L1 L2
Indoor Power
Outdoor Unit
Between Indoor and Outdoor Connection cable Specifi cations(Common in use)
Indoor Power supply
Power Supply Max/Min(V)
208~230V/60Hz
(Code designation IEC:60245 IEC 57 / CENELEC: H05RN-F or IEC:60245 IEC 66 / CENELEC: H07RN-F)
Since it has the external power supply, refer to the outdoor unit installation manual for MAIN POWER.
Slim Duct Type
Conduit
V1 V2 F3 F4
F1 F2
±10% 0.0039in² ,3wires
Global Duct Type
0.0011~0.0023in²,2wires
Conduit
fi nger into the conduit.
35