Samsung AC***KNLDCH User & Installation Manual page 20

Power supply line, fuse or circuit breaker
with current local safety standards.
to ensure the operation of any other domestic appliance connected to the same electric lines.
Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in the wiring diagram
included in the manual.
to the installation of air conditioners.
Devices disconnected from the power supply should be completely disconnected in the condition of overvoltage category.
◆
- Do not connect the earth wire to the gas pipe, water pipe, lighting rod or telephone wire. If earthing is not
◆ Install the circuit breaker.
◆
◆
◆ Install the indoor unit away from lighting apparatus using the ballast.
- If you use the wireless remote control, reception error may occur due to the ballast of the lighting apparatus.
◆ Do not install the air conditioner in following places.
- Place where there is mineral oil or arsenic acid. Resin parts flame and the accessories may drop or water may
leak. The capacity of the heat exchanger may reduce or the air conditioner may be out of order.
- The place where corrosive gas such as sulfurous acid gas generates from the vent pipe or air outlet.
The copper pipe or connection pipe may corrode and refrigerant may leak.
- The place where there is a machine that generates electromagnetic waves. The air conditioner may not operate
normally due to control system.
19