Installation Instructions - Heat-N-Glo 6000TRS-AU Installation And Operation Instructions Manual

1.0 INSTALLATION INSTRUCTIONS

When planning a heater installation, it's necessary
to determine:
• Where the unit is to be installed.
• The vent system configuration to be used.
• Gas supply piping.
• Electrical wiring.
• Framing and finishing details.
27"
(686mm)
2-1/4"
(58mm)
GAS LINE
ACCESS
FIGURE 1. Diagram of the 6000 Series
14-1/4"
(361mm)
9"
(228mm)
38"
(965mm)
GAS LINE
36-1/8"
ACCESS
(917mm)
6-3/4"
(173mm)
GAS CONTROLS
AND SWITCHES
• Whether optional accessories—devices such as a
fan, wall switch, or remote control—are desired.
If the heater is to be installed on carpeting or tile, or on
any combustible material other than wood flooring, the
heater should be installed on a metal or wood panel
that extends the full width and depth of the heater.
28-3/8"
(722mm)
36-1/8"
(917mm)
41"
(1043mm)
TOP
STANDOFFS
GLASS
DOOR
DATA BADGE/LABELS
4
21"
(534mm)
ELECTRICAL
ACCESS
3-5/8"
(94mm)
8-7/8"
(225mm)
STANDOFFS
ELECTRICAL
ACCESS