1
. GENERAL INFORMATION
SERVICE PRECAUTIONS
n Make sure to install new gaskets, O-rings,
circlips, cotter pins, etc. when reassembling.
n When tightening bolts or nuts, begin with
larger-diameter to smaller ones at several
times, and tighten to the specified torque
diagonally.
n Use genuine parts and lubricants.
n When servicing the motorcycle, be sure to
use special tools for removal and installation.
n After disassembly, clean removed parts.
Lubricate sliding surfaces with engine oil
before reassembly.
MX'er SYSTEM
1-4