Table of Contents
Advertisement
Troubleshooting
Blank Screen
Power indicator is off
- Make sure the power cable is connected properly (see section "Connecting").
- Make sure that the monitor was turned on using the power switch (see
section "Startup").
Power indicator lights orange
- Perhaps a power saving mode is active?
Power indicator lights green
- A screen saver may have activated automatically after a certain period of
inactivity. Press any key on your keyboard or move the mouse.
"No Signal" message
- Is the signal cable connected to the monitor and the PC's graphics port (see
section "Connecting")?
- Is the PC turned on (see your PC's documentation)?
Display Problems
Image is displaced to the left/right or to the top/bottom
- If the image appears normal but off-center, you can adjust it using the OSD
functions. For further information, see chapter "Basic Setup", section
"Automatic Image Adjustment" or chapter "OSD Menu Functions", section
"Position Adjustment".
Image flickers or is shaky
- Perhaps setup file chosen for the monitor is incorrect. For information on
monitor setup under Windows® 95/98/ME/2000/NT/XP consult the
"Configuration" section.
Image is blurred
- Check brightness and contrast settings (see chapter "OSD Menu Functions",
section "Contrast/Brightness").
- Check the image noise and sharpness setting (see "Clock" and "Phase"
functions in the "OSD Menu Functions" section).
Color problems
25
6.
Troubleshooting
Advertisement
Table of Contents
