Unpacking The Access Point; Package Contents - Cisco Aironet 1250 Series Manual

Unpacking the Access Point

Package Contents

Each access point package contains the following items:
• Cisco Aironet 1250 series autonomous access point
•
Mounting hardware kit
– – One mounting plate, two 4 x 40 x 3/16 in screws, and a mounting
plate latch (all attached to the access point)
– – Two suspended ceiling T-rail clips, spacers (accommodates
standard and recessed T-rails), and nuts
– – Four 8 x 18 x 3/4 in pan head Phillips sheet metal screws
– – Four #8 plastic wall anchors
– – One 10 x 24 nut (for ground stud on the mounting plate)
– – Two cable tie wraps
•
Product quick start guide
• Product translated safety warning document
•
Cisco product registration card
Follow these steps to unpack the access point:
8
78-17831-01