Advertisement
GIMBAL INSTALLATION:
Uninstalling your current Gimbal Assembly:
If you have a gimbal currently attached to the SOLO, it will need to be re-
moved before installing the 3DR Solo Thermal Gimbal Assembly.
Loosen the three self retaining screws with
the provided Phillips screwdriver.
Carefully lift up the Gimbal assembly from
the drone while pressing in on the two tabs
near the front legs. (Fig. 9)
THERMAL GIMBAL FOR 3DR SOLO MANUAL
The Gimbal should release.
Carefully lift off, and set in front of the
SOLO as shown.
The two cables attached will need to be
disconnected. (Fig. 10)
7
Installing the Gimbal
Advertisement
