Advertisement
3DR SOLO APP AND PWM ASSIGNMENTS:
To access the camera settings,
tap the sliders icon immediately
below the record button:
(Fig. 34)
Tip: Once recording is engaged, the settings are locked out. Stop recording to change
camera settings while flying.
The two camera-settings areas, available from the buttons on the right side of the screen, are
Camera Mode and Camera Settings.
Camera Mode: Will only work in Video Mode, to
record continuous video, start and stop.
Photo/Burst Mode is not available for use at this
time. The VUE PRO Thermal Imager can be set to
photo mode through the FLIR VUE PRO App.
Camera Settings: will be automatically set to
GoPro Silver.
No further adjustment will be necessary.
FOV: Will control the additional PWM channel
(PWM 2) which can be setup in the FLIR VUE
PRO App before flight.
(Fig. 35)
THERMAL GIMBAL FOR 3DR SOLO MANUAL
3DR SOLO App Configuration and Setup
18
Advertisement
