Page 1
Owner’s Manual -10dB -10dB LIMIT LIMIT -10dB -10dB LIMIT LIMIT PROFESSIONAL POWER AMPLIFIER PROFESSIONAL POWER AMPLIFIER PREV. NEXT ENTER CHANNEL 1 CHANNEL 1 CHANNEL 2 CHANNEL 2 -10dB -10dB LIMIT LIMIT -10dB -10dB LIMIT LIMIT PROFESSIONAL POWER AMPLIFIER PROFESSIONAL POWER AMPLIFIER PREV.
Features Features Features • HPA Ei-Series amplifier delivers the following power ratings. 2 x 300 Watts at 8 ohm, 2 x 420 Watts at 4 ohm 2 x 500 Watts at 8 ohm, 2 x 700 Watts at 4 ohm 2 x 700 Watts at 8 ohm, 2 x 1000 Watts at 4 ohm •...
Front Panel Controls E3i / E5i / E7i Front Panel Controls -10dB -10dB LIMIT LIMIT -10dB -10dB LIMIT LIMIT PROFESSIONAL POWER AMPLIFIER PROFESSIONAL POWER AMPLIFIER PREV. NEXT ENTER CHANNEL 1 CHANNEL 1 CHANNEL 2 CHANNEL 2 1. Rack Mounting Ears being output.
30 second cool-down period.If the breaker trips repeatedly,the amplifier may need servicing. 5. AC input ( E3i / E5i / E7i) IEC connector for AC power cable. Con- nect the supplied heavy-gauge 3-pin IEC power cable.
Getting Started - DSP E3i / E5i / E7i Getting Started - DSP The Ei-Series power amplifier features sophisticated high-performance DSP with control for the input and output routing, filter network, EQ, limiter, and time align- ment delay. Follow these steps to navigate through the Ei-Series internal DSP settings: 1.
Page 9
Getting Started - DSP E3i / E5i / E7i Getting Started - DSP EQ -performance setting: DJ, Vocal, Live Sound, Install, Rock, Dance, Jazz. Limiter - The limiter provides additional protection to your speakers from over- load. Press the EDIT button to adjust. The Limiter can be set to -1dB, -3dB, and -9dB.
Presets E3i / E5i / E7i Presets The Ei series DSP features four speaker presets that will allow you to quickly have your amplifier up and running with your speaker configuration. The presets only display the parameters that are essential to the speaker arrangement. If you require additional adjustments, all parameter adjustments are available in Manual mode.
Wiring E3i / E5i / E7i Wiring These are several ways to interface the Ei series amplifier to support a variety of applications. The Ei series features balanced inputs and outputs, so connecting balanced and unbalanced signals is possibles. Unbalances 1/4” Connector Speakon®...
Specifications E3i / E5i / E7i Specifications Output Power Stereo Both Channel Driven 8 ohms 300 W 500 W 700 W 4 ohms 420 W 700 W 1000 W Signal to Noise Ratio 100 dB 100 dB 100 dB (20 Hz ~ 20k Hz)