Connecting The Power - D-Link DNS-1550-04 Quick Installation Manual

To power on the DNS-1550-04:
1. Attach the power cord on the back of the DNS-1550-04 enclosure and plug the other end
into the power source.
2. On the front of the DNS-1550-04, press the power button. It takes about a minute to boot up.
When fully booted:
• The System Status LED turns blue.
• The buzzer beeps one time.
To shut down the DNS-1550-04, press and hold the power button until the System status LED
indicator turns red then goes dark.
To restart the DNS-1550-04, press the power button again.
D-Link DNS-1550-04 Quick Installation Guide

3.3 Connecting the Power

Power Connections
System Power Button
Status LED
7