Sharp MX-B201D Technical Handy Manual page 37

SHARP
FAX MODE (Cont'd)
Program
Program Name
Number
SECURITY
12
SELECT
FAX REMOTE
13
NUMBER
REMOTE
14
RECEPTION
FAX SIGNAL
15
RCV.
16 RCV. REDUCE
17 BEEP LENGTH
RINGER
18
VOLUME
BEEPER
19
VOLUME
20 DIAL MODE
DISTINCTIVE
21
RING
22 INDEX PRINT
23 2-SIDED RX
TRAY
24
SELECTION
Setting Codes
1: ON
2: OFF
Set the 1-digit number used to activate remote fax
0-9 (5)
1: ON
2: OFF
1: ON Enable automatic fax reception when a fax tone is
2: OFF heard after answering a call on an extension phone.
When a fax is received that is larger than the
1: ON
printing paper, enable reduction of the fax to the
2: OFF
size of the paper to avoid the fax being cut off.
1: 3 sec
Set the length of the beep that sounds when fax
2: 2 sec
3: NO BEEP
1: OFF
2: LOW
3: MIDDLE
4: HIGH
1: OFF
2: LOW Set the volume of the beep that sounds when a key
3: MIDDLE
4: HIGH
1: TONE
Set the dial mode for the type of line you are on.
2: PULSE
1: OFF
2: STD
3: PATTERN 1
4: PATTERN 2
5: PATTERN 3
6: PATTERN 4
7: PATTERN 5
1: ON Enable printing of a black mark (index) at the top of
2: OFF
1: ON Print on both sides of the paper when a multi-page
2: OFF
1: AUTO
2: TRAY 1
3: TRAY 2
USER PROGRAM
Description
Enable the polling security function.
reception.
Enable the remote reception function.
transmission or reception ends.
Set the volume of the ringer.
is pressed.
Set the ring pattern for distinctive ring.
each received fax page.
fax is received.
Set the tray for printing received faxes.
37