Sharp MX-B201D Technical Handy Manual page 34

USER PROGRAM
COPY MODE (Cont'd)
Program
Program Name
Number
SOUND AT
17
DEFAULT
TONER SAVE
18
MODE
AE LEVEL
19
ADJUST
20 LANGUAGE
RESET
21
FACTORY
SORT AUTO
22
SELECTION
CHECK OC
OPEN:
24
CHECK RSPF
OPEN
VALID COPY
25
WIDTH
28 LSU SETTING
29 PAPER TYPE
DISPLAY
30
CONTRAST
DATE & TIME
31
SET
DATE & TIME
32
FORMAT
34
Setting Codes
1: ON Use this to sound a beep when a base setting is
2: OFF
This mode reduces toner usage by about 10% when
1: ON
copying. Toner save mode is effective when the
2: OFF
The automatic exposure level can be adjusted
1: SPF/RSPF separately for the document glass and the
2: OC
The factory default setting for the exposure level
1: US ENG.
2: ENGLISH
3: FRENCH This is used to set the language used in the display.
4: SPANISH
5: GERMAN
1: YES This is used to return all settings to the factory
2: NO
1: ON Use this setting to enable or disable sort auto select
2: OFF
You can set the operation that takes place if the
1: ON
[Start] key is pressed when the RSPF is not
2: OFF
1. LARGE Set the allowed paper sizes when copying from the
(A4/LTR) bypass tray. When 5.5x8.5 is selected, a copy of the
2. SMALL letter size original will only be printed up to invoice
(B5R/INV)
1: ON Select whether copying is allowed when the polygon
2: OFF
Set the temperature of the fusing unit when the
1. PLAIN
bypass tray is used. Normally, "Heavy Paper" should
2. HEAVY
1. LIGHTER
2. LIGHT
3.NORMAL
4.DARK
5. DARKER
1: TIME
2: DATE
Description
selected.
exposure mode is AUTO or TEXT.
This is used to adjust the exposure level.
SPF/RSPF.
is "center".
default settings.
mode.
completely closed.
size.
motor is rotating or stopped
be used.
Sets the contrast of the display.
This function is enabled when MX-NB11
(Network Expansion Kit) is installed
This function is enabled when MX-NB11
(Network Expansion Kit) is installed
SHARP