24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports or 4 10G SFP+ Ports
Using the local browser UI, you can control how PoE power is allocated across active
PoE+ ports by overriding the default or autodetected PoE power limits for individual
PoE+ ports. You can also specify the exact PoE power limit per port from 3.0W to 30.0W.
For more information about PoE, see the installation guide and user manual. To find
your installation guide and user manual, visit netgear.com/support/download/ and
enter your model number in the search box.
Gigabit aggregation switching with
PoE
You can use the switch as an aggregation switch that serves as power sourcing equipment
(PSE) in a network that gives users Gigabit access to network devices and the Internet.
The switch can provide PoE or PoE+ to devices such as WiFi access points, cameras,
and VoIP phones.
In a small office or home office network, you can use the switch as a Gigabit backbone
switch and connect it directly to your Internet router or Internet modem.
The following figure shows the switch functioning as an aggregation switch with an
uplink to a network router, a firewall, and the Internet and connected to one managed
Applications
24
Hardware Installation Guide