LAMI Freesia 55C Instruction Manual page 15

Under-film
【5】 Perform laminate processing.
1 : Use the 【THICKNESS】 button to adjust pressure (gap) according to thickness of processing material
and 【PRESS/RELEASE】 button for up &down of roller
2 : Adjust to the wanted speed using 【SPEED】 button (speed can be adjusted during rotation of the laminate
roller) and press 【RUN/STOP】 button to rotate the laminate roller.
※ Here, the re-winding device for release liner automatically rotates. The re-winding device for final
products is controlled by switch. (Refer to the above for switch operation method)
3 : Insert the script towards the laminate roller for laminate processing.
4 : Cut the processing material using cutter after processing.
5 : After completion of all processing works, use the 【PRESS/RELEASE】 button to lift the laminate roller
and cover with a cloth for storage.
【THICKNESS】 is controlled for thickness of sum of script, thickness of under film and thickness of film
14
Release liner Paper tube for re-winding release liner
Laminate film
After setting the re-winding
shaft, please turn the shaft
holder cover
Paper tube for product
Re-winding