Table of Contents
Advertisement
【℃ ℃ ℃ ℃ /℉ ℉ ℉ ℉ 】 button
This button is not used.
【SPEED】 button
Rotational speed of the laminate roller
can be adjusted within 0 ~ 1.9 m/min.
【MEMORY】 button
This button is used during maintenance
to display appropriate mileage
When pressed once, mileage from
previous reset until now is displayed.
(Press
pressing 【MEMORY】 to reset.)
When
mileage until now is displayed. (This
cannot be reset)
When pressed again, it returns to the
original display.
【REVERSE】 button
When pressed once, the laminate roller
rotates in reverse direction
When pressed once again, it returns to
forward rotation.
Do not operate 2 or more buttons simultaneously.
The following buttons cannot be used on the product.
【℃/℉】 button, 【TEMPERATURE】 button, 【THICKNESS】 button, 【PRESS/RELEASE】 button
Foot Switch
This device can be operated by operation panel as well as foot switch included.
: The roller begins to rotate when the foot switch is pressed. (About 2seconds)
: The roller stops rotating when the foot switch is pressed. (About 2seconds)
: The roller can up &down when the foot switch is pressed (More and 3 seconds)
10
Buttons on the operating panel
【RUN/STOP】
button
pressed
once
again,
while
total
Caution
【TEMPERATURE】 button
This button is not used.
【THICKNESS】 button
This button is not used.
【PRESS/RELEASE】 button
This is button to adjust pressure of
rollers.
Set the value according to the paper
and film to be processed.
【RUN/STOP】 button
This button starts and stops roller
rotation.
The roller rotates when the button is
pressed with the roller at stop, and the
roller stops when the button is pressed
again.
Advertisement
Table of Contents
