Table of Contents
Advertisement
Before Processing Laminate
About Laminate Film
There are two types of laminate film including 「roll type」 and 「pack type」.
This product uses 「cold roll film」 type.
※ 「Pack type」 and 「hot roll film」 cannot be used.
Thickness (µ)
Paper core holder Size
(Inner Diameter)
Type of Roll Film
Precautions for Handling Laminate Film
Do not place the laminate film in places with high temperature and humidity.
When lamination is not being done, store the film on the exclusive film shelf or in a box.
Use film appropriate for the laminator.
If a problem is found in the film before use, do not use and contact the store. Reckless use may result in
failure of the laminator.
Thickness of the laminate film is selected according to the use.
Thickness of the cold roll film used by this product ranges from 20 µ to 300 µ.
Size of installable paper tube differs according to the laminate structure.
This product uses a 3-inch (about 77 mm) paper core holder.
Hot roll film
Apply heat to melt glue and attach the film.
Cold film
Parting paper (release paper) is attached on the surface applied with glue.
Release the film with the Re-winding device and compress with the roller for use.
11
Advertisement
Table of Contents
