General Service; Preparing The Engine; Customer Responsibilities - Yardworks 060-1662-4 Instruction Manual

6
model numbers 060-1662-4 | 060-1663-2 | 060-1664-0 | 060-1665-8 | contact us: 1.866.523.5218
trailer and refuel it on the ground. If this is not possible,
then refuel such equipment with a portable container,
rather than from a gasoline dispenser nozzle.
tank or container opening at all times until fueling is
complete.
DO NOT use a nozzle lock-open device.
immediately.
NEVER
tighten securely.

GENERAL SERVICE

NEVER operate machine in a closed area.
in safe working condition.
NEVER remove or tamper with any safety devices.
Check their proper operation regularly. NEVER do
anything to interfere with the function of a safety device
or to reduce the protection offered by the safety device.
buildup. Clean oil or fuel spillage and remove any fuel-
soaked debris. Allow machine to cool before storing.
machine. Repair, if necessary, before restarting.

PREPARING THE ENGINE

This lawn mower is shipped WITHOUT
OIL OR GASOLINE in the engine.
NOTE: Gasoline containing up to 10% ethanol (E10)
is acceptable for use in this machine. The use of any
gasoline exceeding 10% ethanol (E10) will void the
product warranty.
VI. CUSTOMER RESPONSIBILITIES
using your lawn mower.
operating this machine, including (at a minimum) sturdy
footwear, eye protection and hearing protection. DO
NOT mow in shorts and/or open-toed footwear.
NEVER attempt to make any adjustments or repairs
while the engine (motor) is running. Disconnect the
spark plug wire and ground against the engine to
prevent unintended starting.
chute frequently, and replace with manufacturer's
recommended parts when necessary.
and use extra caution when servicing it.
DO NOT change the engine governor setting or
overspeed the engine.
as necessary.
ALWAYS let someone know you are outside mowing.
NEVER allow children in the vicinity of any operating
mower, even if the blades are off. Children should be
under the supervision of a responsible adult other than
the operator for the duration of the mowing operation.
CAUTION: An Operator Presence Control
is installed on this lawn mower in order to
minimize the risk of blade contact injury.
DO NOT under any circumstances attempt
to defeat the function of the operator
control. The blade turns when the engine
is running.