Yardworks 060-1662-4 Instruction Manual page 14

14
model numbers 060-1662-4 | 060-1663-2 | 060-1664-0 | 060-1665-8 | contact us: 1.866.523.5218
2. Ensure that the rear door
locks into the EZ bag
access
(IF EQUIPPED).
3. Place the grass catcher
frame hooks onto the
grass bag brackets.
NOTE: For clarity, rear door
is not shown.
4. Pull theoperator
presence control bar
down to the upper handle.
5. Rear door will release
from the EZ bag access
(IF EQUIPPED) and rest
on grass catcher.
NOTE: DO NOT force the door shut. ALWAYS use the
operator presence control bar.
6. Ensure that rear door covers any gap between mower
deck and bagging unit.
7. To convert to mulching or discharging operation,
remove grass catcher and close the rear door.
SIDE DISCHARGING
IMPORTANT: THE REAR
DOOR (IF EQUIPPED)
MUST BE CLOSED.
1. Open the mulch door.
2. Install the discharge
NOTE: To convert to mulching or bagging operation, side
mulch door must be closed and if equipped with a latch,
the latch should be in the locked position.
3
MULCH/DISCHARGE
3
GUARD
1. Open the mulch door.
2. Install the mulch/
4
SIMPLE STEPS TO
REMEMBER WHEN
CONVERTING YOUR LAWN MOWER
FOR MULCHING
FOR REAR BAGGING
FOR SIDE DISCHARGING
as shown. The mower is
now ready for discharging
operation.
discharge guard under
the door as shown. The
mower is now ready for
mulching operation.
the latch is locked.
the latch is locked.
CAUTION: DO NOT run your lawn mower
without the rear door closed or an approved
grass catcher properly installed. NEVER
attempt to operate the mower with the rear
door removed or propped open. Serious
injury may result from operating the mower
with the rear discharge open.