Wireless Poe Access Point (Tew-755Ap / Tew-821Dap); Ceiling Mount Installation; Wall Mount Installation - TRENDnet TEW-755AP2KAC User Manual

TRENDnet User's Guide

Wireless PoE Access Point (TEW-755AP / TEW-821DAP)

Ceiling Mount Installation


Select the desired ceiling to mount the access point.

First, install the mounting plate using the included drywall anchors (only
required if in wall stud installation points are not available) and screws.
Note: It's optional to use a stud finder to locate in wall studs and mark as
installation points but not required.

Place mounting plate on ceiling (clips facing away from ceiling) in desired
mounting location and mark the points where the anchors/screws will be
installed.

Using a power drill and drill bits, create the holes were the anchors/screws will
be installed.

If anchors are required, install the anchors in the holes created first, then
attached the mounting plate with the drywall screws using the power drill and
Phillips bit or screwdriver.

After mounting plates are installed, align the access point mounting holes with
the mounting plate clips and slide in acces point to lock into place.

Wall Mount Installation


Select the desired wall to mount the access point and make sure to install the
mounting plates with the correct orientation.

First, install the mounting plate using the included drywall anchors (only
required if in wall stud installation points are not available) and screws.
Note: It's optional to use a stud finder to locate in wall studs and mark as
installation points but not required.

Place mounting plate on wall (clips facing away from wall) in desired mounting
location and mark the points where the anchors/screws will be installed.

Using a power drill and drill bits, create the holes were the anchors/screws will
be installed.

If anchors are required, install the anchors in the holes created first, then
attached the mounting plate with the drywall screws using the power drill and
Phillips bit or screwdriver.

After mounting plates are installed, align the access point mounting holes with
the mounting plate clips and slide in acces point to lock into place.
© Copyright 2017 TRENDnet. All Rights Reserved.
TEW-755AP2KAC / TEW-821DAP2KAC
11