Safety; Instrument Symbols; Electrical Safety - TA Q Series Getting Started Manual

Safety

CAUTION: The operator of this instrument is advised that if the equipment is used in a
manner not specified in this manual, the protection provided by the equipment may
be impaired.

Instrument Symbols

The following labels are displayed on the TMA instrument for your protection:
Symbol
Please heed the warning labels and take the necessary precautions when dealing with those parts of the
instrument. The TMA Getting Started Guide contains cautions and warnings that must be followed for your own
safety.

Electrical Safety

You must unplug the instrument before doing any maintenance or repair work; voltages as high as 120/240 Vac
are present in this system.
WARNING: High voltages are present in this instrument. Maintenance and repair of
internal parts must be performed only by TA Instruments or other qualified service
personnel.
WARNING: After transport or storage in humid conditions, this equipment could fail to
meet certain aspects of the safety requirements of the safety standards indicated.
Refer to the CAUTION on page 24 for the method of drying out the equipment before
use.
8
Explanation
This symbol indicates that a hot surface may be present. Take care not to touch
these areas or allow any material that may melt or burn to come in contact with
these hot surfaces
This symbol on the rear access panel indicates that you must unplug the instru-
ment before doing any maintenance or repair work; voltages exceeding 120/240
Vac are present in this system.
If you are not trained in electrical procedures, do not remove the cabinet covers
unless specifically instructed to do so in the manual. Maintenance and repair of
internal parts must be performed only by TA Instruments or other qualified
service personnel.
TMA Q Series Getting Started Guide