Blf Led Patterns; Table 15: Blf Led Patterns - Grandstream Networks GXP2130 Administration Manual

LDAP Name Attributes
LDAP Number
Attributes
LDAP Display Name
Max. Hits
Search Timeout
Sort Results
LDAP Lookup
Lookup Display Name

BLF LED Patterns

Pattern: Default
Call's state Light Indication
Offline
Specify the "name" attributes of each record which are returned in the LDAP
search result. This field allows the users to configure multiple space
separated name attributes.
Example:
gn
cn sn description
Specifies the "number" attributes of each record which are returned in the
LDAP search result. This field allows the users to configure multiple space
separated number attributes.
Example:
telephoneNumber
telephoneNumber Mobile
Configures the entry information to be shown on phone's LCD. Up to 3 fields
can be displayed.
Example:
%cn %sn %telephoneNumber
Specifies the maximum number of results to be returned by the LDAP server.
If set to 0, server will return all search results. The default setting is 50.
Specifies the interval (in seconds) for the server to process the request and
client waits for server to return. The default setting is 30 seconds.
Specifies whether the searching result is sorted or not. The default setting is
"No".
Configures to enable LDAP number searching when dialing and receiving
calls.
Configures the display name when LDAP looks up the name for incoming
call or outgoing call. This field must be a subset of the LDAP Name Attributes.
Example:
gn
cn sn description

Table 15: BLF LED Patterns

Off
GXP21XX Administration Guide
Pattern: Analog
Call's state Light Indication
Offline Off
P a g e | 77