Grandstream Networks GXP2130 Administration Manual page 58

Wallpaper Server Path
Upload Wallpaper
Color Background
Screensaver
Screensaver Source
Screensaver Timeout
Screensaver Server
Path
Screensaver XML
Download Interval
Settings  Preferences  LED Control
BLF LED Pattern
Disable VM/MSG
power light flash
BLF LED Pattern
Explanation Form
Settings  Ring Tone
Call Progresses Tones
System Ring Tone
Dial Tone
Second Dial Tone
Message Waiting
Ring Back Tone
Call-Waiting Tone
http://htmlcolorcodes.com/ . If an invalid code is configured, the phone will
use default value #000000 instead.
Specifies the wallpaper server path. This option will take effect when
wallpaper source is "Download".
Click on the "Upload" button to browse and upload the desired wallpaper file.
This option will take effect when wallpaper source is "Uploaded".
Enter a color you wish to use in HEX format. e.g. #000000
Reference: http://htmlcolorcodes.com
Please note the user must select "Color Background" in "Wallpaper Source"
option in order to use the configurable color background code.
Configures Screensaver Feature, or "to enable Screensaver feature if no
VPK is active". Please note this option is also available under
LCD->MENU->Preference->Appearance. The phone will consider the page
active if VPK is in Early (ringing), Trying (dialing) and Confirmed (talking)
status when VPK is configured with mode "BLF", "Eventlist BLF" or
"Presence". By default, screensaver is enabled.
Sets the location where screensaver is loaded from. If from USB, please
have a folder named "screensavers" containing your pictures.
Configures the minutes of idle before the screensaver activates. Valid range
is 3 to 6. The default time is 3 minutes.
Configures the server path which contains download screensaver definition
XML.
Configures the screensaver XML download interval (in minutes). If set to 0,
automatic download will be disabled. Valid range is 5 to 720.
This is used to configure the color and pattern of the LED based on status
updates. The default setting is "Default".
The BLF LED Patterns are listed in the following Table 13.
The VM/MSG light cannot flash even though there's an unread voice mail or
message when set to "Yes". Default settings is "No".
Users could view the color and pattern of the LED status based on the BLF
status update.
Configures ring or tone frequencies based on parameters from local telecom.
The default value is North American standard. Frequencies should be
configured with known values to avoid uncomfortable high pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing ("On time" in 'ms') while OFF is the period of
silence. In order to set a continuous ring, OFF should be zero. Otherwise it
GXP21XX Administration Guide
P a g e | 57