Grandstream Networks GXP2130 Administration Manual page 55

Settings  Outbound Notification
Action URL
Destination
Notification
Settings  Preferences  Audio Control
Headset Key Mode
"Label" could be the description you want to use.
For details, please check the "Multicast Paging User Guide" on our Website.
For detailed instruction for this part, please refer to: [Outbound Notification
Support] Section in this Administration Guide.

Setup Completed

Registered

Unregistered

Off Hook

On Hook

Incoming Call

Outgoing Call

Missed Call

Established Call

Terminated Call

Open DND

Close DND

Open Forward

Close Forward

Blind Transfer

Attended Transfer

Hold Call

UnHold Call
Up to 10 destinations can be configured here. For detailed instruction for this
part, please refer to: [Outbound Notification Support] Section in this
Administration Guide.
Specifies the message body of the notification for each event that can be
customized with embedded dynamic attributes. For more details, refer to:
[Outbound Notification Support] section in this Administration Guide.
When headset is connected to the phone, users could use the HEADSET
button in "Default Mode" or "Toggle Headset/Speaker".

Default Mode:
 When the phone is in idle, press HEADSET button to off hook the
phone and make calls by using headset. Headset icon will display
on the screen in dialing/talking status.
 When there is an incoming call, press HEADSET button to pick up
the call using headset.
 When there is an active call using headset, press HEADSET button
to hang up the call.
 When Speaker/Handset is being used in dialing/talking status, press
GXP21XX Administration Guide
P a g e | 54