ActionTec V1000H User Manual page 8

Chapter 1 Introduction
USB
The USB LED illuminates when a USB device is connected via the Gateway's
USB port. This port is not currently operational, but may be enabled in a future
firmware update.
Wireless
The Wireless LED illuminates when the Gateway is connected wirelessly, assum-
ing the Gateway's Wireless feature is turned on.
WPS Button
The WPS button activates WPS (WiFi Protected Setup) on the Gateway. To use
WPS, press the WPS button on the Gateway, then, within two minutes, press the
WPS button on a device you wish to connect to the Gateway's wireless network.
The device will automatically join the Gateway's wireless network. Repeat for
other wireless devices.
5