ActionTec V1000H User Manual page 46

2. Click in the Enable radio button next to Remote GUI to activate.
3. Enter a user name and password in the appropriate text boxes beneath step 2.
4. Set the remote management port. It is set to port 443 by default. If the remote
management port number has been changed, you will need to use the URL
"https://" followed by the Gateway's IP address, a colon (:), then the port num-
ber to which the remote management port was changed.
Example: https://192.170.1.1:234.
5. Select the remote management timeout. If you select one of the time periods
provided in the drop-down list, remote management of the Gateway will stop
after the selected time period, if no actions are detected.
Apply to save your changes.
6. Click
Chapter 5 Advanced Configuration
43