ActionTec V1000H User Manual page 7

Actiontec V1000H Gateway
Power
The Power LED displays the Gateway's current status. If the Power LED glows
steadily green, the Gateway is receiving power and fully operational. When the
Power LED is rapidly flashing, the Gateway is initializing. If the Power LED is
glows red when the Power cord is plugged in, the Gateway has suffered a critical
error and technical support should be contacted. If the Power LED is flashing
red, the Gateway is performing a firmware update.
DSL
The DSL LED illuminates when the Gateway is connected to an ADSL line via
the appropriate port. If the DSL LED is flashing, the Gateway is in training for
DSL service.
WAN Ethernet
When the WAN Ethernet LED glows steadily, the Gateway is connected to an
Ethernet WAN. When it flashes, it signifies that data traffic is traveling across
the connection.
Internet
When the Internet LED glows steadily, the Gateway is connected to the DSL
provider. When it flashes, data traffic is passing across the Gateway.
LAN Ethernet
The LAN Ethernet LEDs illuminate when the Gateway is connected to another
device via one of its LAN Ethernet ports. When one of the LAN Ethernet LEDs
flashes, data traffic is passing across the corresponding connection.
HPNA
The HPNA LED illuminates when the Gateway is connected to another device
via its HPNA port. When it flashes, data traffic is passing across the connection.
4