Using Power Save Setting - SoftBank 601HW User Manual

While window below appears (within 120 seconds), make WPS
connection settings on access point device
OK
・When "Wi-Fi Spot WPS connection failed." appears, tap
OK then retry.
To make other settings on access point device, follow the
onscreen instructions
Wi-Fi router connects to access point.
Precautions for Using WPS Function
SSID Stealth
While Wi-Fi router's stealth is enabled, WPS function is
not available. For SSID stealth function, see
"Setting LAN Wi-Fi."
Encryption
When encryption is set to WEP, WPS function is not
available.

Using Power Save Setting

Set Power save setting to ON to save power consumption
during use for longer usage time.
The maximum communication speed of mobile network and
WLAN is reduced to save power consumption.
Power save setting
In "Power save setting,"
"Quick Setup,"
Using Power Save Setting
OFF
"Power save setting" turns to
67
ON .