Device Recognition/Removal On Windows Pc - SoftBank 601HW User Manual

42
Device Recognition/Removal on
Windows PC
Wi-Fi router automatically connects to the Internet when
powered on. Connect with PC via USB Cable to allow data
communication.
Device Recognition (Windows)
Upon connecting the first time, the device driver is installed
automatically.
Power on PC
Insert USB Cable (Type-C plug) into Wi-Fi router External
Device Port, and USB plug into PC
PC should recognize Wi-Fi router within a few seconds.
Device Removal (Windows)
・When using a PC, check that data uploading/downloading is
completed before removing Wi-Fi router.
Check that data uploading/downloading is completed.
Remove Wi-Fi router from PC
Removal is complete.
Cautions for Removing Wi-Fi Router
Standby/Hibernation
Wi-Fi router may malfunction if PC enters standby
(suspend/resume) or hibernation with it connected. Be sure
to remove Wi-Fi router before leaving a PC unattended,
etc. Wi-Fi router may malfunction if connected before PC
starts/restarts. Remove Wi-Fi router before starting/
restarting PC.
WEB UI
Exit WEB UI before removing Wi-Fi router. Do not remove
Wi-Fi router during transmissions.