Charging Battery - SoftBank 601HW User Manual

14
Wi-Fi Name and Password (Security Key)
Remove Battery and check Wi-Fi name (Network Name) and
password (Security Key: WPA Key or WEP Key).
Be sure to power off to perform the following steps.
・The default Wi-Fi name and password (Security Key: WPA
Key or WEP Key) can be checked on the included WLAN
Initialization Sticker.
Remove Battery Cover
・Use notch ( ○ ) to lift Battery Cover then remove it.
・Be careful not to hurt your fingernail etc.
Remove Battery
・Use tab ( ○ ) to slowly lift up as shown.
Check Wi-Fi name and Password (Security Key)

Charging Battery

Wi-Fi router is not fully charged by default. Charge Wi-Fi
router before use.
Wi-Fi router discharges even when not in use. Charge Wi-Fi
router before use if it is not in use for a long time.
Usage times gradually become shorter due to repeated
charging/discharging. For estimated charging times and usage
times, see "Specifications."
Charging
Charging Conditions
Under low temperatures charging, performance decreases.
Use USB Cable and AC Charger (sold separately) in
temperatures between 5°C - 35°C.
USB charging may be unavailable depending on Wi-Fi router
temperature.
Use Supplied Accessories or Accessories Sold
Separately
Always charge with supplied USB Cable connected to
computer or with an AC Charger (sold separately).
Wi-Fi Router and AC Charger (Sold Separately)
Becoming Warm/Hot
Wi-Fi router and AC Charger (sold separately) may become
warm while charging. This is not a malfunction. However,
stop using them immediately if they become extremely hot;
they may be malfunctioning.
Precaution for Extended Use
Wi-Fi router may become hot while in use or while
charging for a long period, especially in high temperatures.
Prolonged contact with skin may cause low-temperature
burn injuries.
Connecting USB Cable
Confirm that orientation of USB Cable plugs is correct.
Connecting in wrong orientation may cause damage or
malfunction.
Display while Charging
Even when power is off, Press
and battery level.
When charging is complete,
Using USB (Computer)
Use supplied USB Cable.
・Make sure to power on computer before charging.
・Depending on computer connection environment, charging
may fail.
to show animation
appears.