Inserting/Removing Battery
Inserting Battery
Remove Battery Cover
・Use notch ( ○ ) to lift Battery Cover then remove it.
・Be careful not to hurt your fingernail etc.
Insert Battery
・Align Battery terminals with Wi-Fi router terminals
with (+) (-) printed side facing up and press Battery in
direction
, then firmly push down in direction
Close Battery Cover
・ Check the positions of △ marks on Wi-Fi router
back of Battery Cover
and firmly press around the edge
of Battery Cover to fit it to Wi-Fi router.
・Hold and slide on the edge of Battery Cover to check there
are no gaps.
Removing Battery
Power off Wi-Fi router in advance.
Remove Battery Cover
・Use notch ( ○ ) to lift Battery Cover then remove it.
・Be careful not to hurt your fingernail etc.
Remove Battery
・Use tab ( ○ ) to slowly lift up as shown.
.
Close Battery Cover
・ Check the positions of △ marks on Wi-Fi router
back of Battery Cover
of Battery Cover to fit it to Wi-Fi router.
・Hold and slide on the edge of Battery Cover to check there
and the
are no gaps.
13
and the
and firmly press around the edge