Device Recognition/Removal On Mac; Installing/Uninstalling Driver (Mac) - SoftBank 601HW User Manual

46
Device Recognition/Removal on
Mac
Wi-Fi router automatically connects to the Internet when
powered on. Connect with Mac via USB Cable to allow data
communication.
Removal Cautions
Before Entering Sleep Mode
Wi-Fi router may malfunction if Mac enters Sleep mode
with it connected. Be sure to remove Wi-Fi router before
leaving Mac unattended, etc. Wi-Fi router may malfunction
if connected before Mac starts/restarts. Remove Wi-Fi
router before starting/restarting Mac.
WEB UI
Exit WEB UI before removing Wi-Fi router. Do not remove
Wi-Fi router during transmissions.
Device Recognition (Mac)
Power on Mac
Insert USB Cable (Type-C plug) into Wi-Fi router External
Device Port, and USB plug into Mac
Mac should recognize Wi-Fi router within a few seconds.
Device Removal (Mac)
Check that data uploading/downloading is completed
Remove Wi-Fi router from Mac
Device removal is complete.
Installing/Uninstalling Driver
(Mac)
Driver Installation (Mac)
Screenshots and steps described here are for Mac OS X 10.12.
Connect Wi-Fi router to Mac
"Pocket WiFi" icon appears on desktop and "Pocket WiFi"
folder automatically opens.
Double-click Pocket WiFi
"Install Pocket WiFi" appears on desktop.
Enter user name and password
Installation is complete.
OK