Avidyne Entegra EX5000 Pilot's Manual
  1. Manuals
  2. Brands
  3. Avidyne Manuals
  4. Avionics Display
  5. Entegra EX5000
  6. Pilot's manual

Avidyne Entegra EX5000 Pilot's Manual

Columbia 350, columbia 400 multi-function display
Hide thumbs Also See for Entegra EX5000:
Table of Contents

Advertisement

Quick Links

See also: Pilot's Manual
Columbia 350, 400
Multi-Function Display
Pilot's Guide
600-00102-000 Rev. 09

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Entegra EX5000 and is the answer not in the manual?

Questions and answers

Related Manuals for Avidyne Entegra EX5000

Summary of Contents for Avidyne Entegra EX5000

  • Page 1 Columbia 350, 400 Multi-Function Display Pilot’s Guide 600-00102-000 Rev. 09...
  • Page 3 Updated per ECO-07-261 May 5, 2008 Updated per ECO-08-106 System Configuration When contacting your dealer or Avidyne technical support, and when logging onto MyAvidyne.com for the first time, please have your EntegraEX5000 serial number and Subscriber Communicator serial number available:...
  • Page 4 Note: All images contained within this document, including screenshots and other displays, are for reference only and are subject to change. Images in this document may differ from what you see on your equipment. Entegra EX5000 -ii- 600-00102-000 Rev. 09...
  • Page 5 Notes and Warnings Notes and warnings provide guidance for the use of the EX5000. Avidyne strongly suggests that you pay close attention to notes and warnings for your own safety. For example: Note: Notes provide useful information about how to use the EX5000.
  • Page 6 By using Broadcast datalink, you can access weather information made available from sources external to Avidyne Corporation. Avidyne does not control, edit or review the content of such information and is not responsible for such information or the actions or conduct of any company that provides sources of weather data through the Broadcast datalink.
  • Page 7 The NOTAM information provided by the EX5000 is for planning purposes only. Always consult official NOTAMS for the latest restrictions. Avidyne does not provide a complete list of NOTAMS. Local NOTAMS, most laser light NOTAMS, and any NOTAMS other than restricted airspace are not listed.
  • Page 8 This page intentionally left blank. Entegra EX5000 -vi- 600-00102-000 Rev. 09...

  • Page 9: Table Of Contents

    Table of Contents Introduction................1 Using the Entegra EX5000 MFD .............2 Power Up ....................4 Map Page..................7 Map Page—Controls ................8 Map Page Symbols—Terrain and Position..........12 Map Page Symbols—Runways and Flight Plan ........16 Map Orientation Control ................18 Errors Displayed on the Map Page............19 Loss of GPS Input ................19...
  • Page 10 Using Multilink Features .............. 108 Viewing Multilink Data..............108 Optimizing your Multilink Setup ........... 111 Multilink Usage Guidelines ............112 Datalink Messaging................113 Messaging Knobs and Buttons ............ 114 Using Datalink Messaging ............117 Entegra EX5000 -viii- 600-00102-000 Rev. 09...
  • Page 11 Map Symbols ..................135 Line Styles ...................137 Data Blocks ..................139 Nav Messages ..................141 Traffic Messages .................143 Lightning Messages................145 Engine Messages ................148 PFD Messages ..................149 Narrowcast Datalink Messages ............150 Broadcast Datalink Messages ............152 Avionics Abbreviations ................156 600-00102-000 Rev. 09 -ix- Entegra EX5000...
  • Page 12 List of Figures List of Figures Figure 1.1 Entegra EX5000 MFD ............2 Figure 1.2 Entegra EX5000 Initialization Page........4 Figure 2.1 Map Page Controls............8 Figure 2.2 Map Page Symbols–Terrain and Position .......12 Figure 2.3 Map Page Symbols—Runways and Flight Plan....16 Figure 3.1 Map Page—Traffic Mode ..........22 Figure 4.1 CMax Chart Page (Airport)..........30...
  • Page 13 Figure 10.10 Multilink Datalink with Canadian METAR flags ..110 Figure 10.11 XM WX NEXRAD Coverage Area......111 Figure 10.12 Datalink Messaging Knobs and Buttons ....114 Figure 10.13 Receiving a Datalink Message ......... 118 600-00102-000 Rev. 09 -xi- Entegra EX5000...
  • Page 14 Table 12.13 Traffic Messages ............143 Table 12.14 Lightning Messages...........145 Table 12.15 Engine Messages ............148 Table 12.16 PFD Messages ............149 Table 12.17 Narrowcast Datalink Messages .........150 Table 12.18 Broadcast Datalink Messages ........152 Table 12.19 Avionics Abbreviations ..........156 Entegra EX5000 -xii- 600-00102-000 Rev. 09...

  • Page 15: Introduction

    1 Introduction The Entegra EX5000 Multi-Function Display (MFD) provides a moving map view of your flight plan, broadcast datalink weather, lightning, traffic, navigation data, obstacles, terrain, and CMax™ approach plates with an intuitive user interface. The EX5000 offers the following standard and optional features: Engine instruments display.

  • Page 16: Using The Entegra Ex5000 Mfd

    Introduction 1.1 Using the Entegra EX5000 MFD The controls on the bezel of the Entegra EX5000 are placed to allow you quick and intuitive access to the information you need, when you need it (see Figure 1.1). Figure 1.1 Entegra EX5000 MFD 1) PhotoCell Light Sensor—Automatically compensates display...
  • Page 17 Using the Entegra EX5000 MFD 2) Brightness Control—Allows you to override the default display brightness and adjust the brightness level. Press the top button to brighten the display; press the bottom button to dim it. 3) Data Port—Provides a front panel access point for loading database updates.

  • Page 18: Power Up

    When the EX5000 is ready the, “Press any bezel key to continue,” message is displayed. Figure 1.2 Entegra EX5000 Initialization Page The EX5000 Startup Page reports the valid dates for the currently ™ loaded CMax chart data and NavData.
  • Page 19 For NavData, the date range displays if the data is valid; if it is not valid, the word, “EXPIRED,” and the expiration data are displayed in yellow. For more information about updating CMax and NavData, see Section 12.1, "Updating Your Databases" on page 122. 600-00102-000 Rev. 09 Entegra EX5000...
  • Page 20 Introduction This page intentionally left blank. Entegra EX5000 600-00102-000 Rev. 09...

  • Page 21: Map Page

    Map Page—Controls, page 8 ● Map Page Symbols—Terrain and Position, page 12 ● Map Page Symbols—Runways and Flight Plan, page 16 ● Map Orientation Control, page 18 ● Errors Displayed on the Map Page, page 19 ● Entegra EX5000 600-00102-000 Rev. 09...

  • Page 22: Map Page-Controls

    Bezel keys on the right side of the screen provide access the mapping functions and control how the Map is viewed. Figure 2.1 Map Page Controls Note: For information about the Map Symbols, see Section 12.5, "Map Symbols" on page 135. Entegra EX5000 600-00102-000 Rev. 09...
  • Page 23 AIRMET—Displays graphical AIRMETs only. ◆ SIGMET—Displays graphical SIGMETs only. ◆ DSPLY OFF—Turns off display of all weather ◆ information. For more information about Datalink functions, see Section 10.5, "Map Page with Datalink Weather" on page 100. 600-00102-000 Rev. 09 Entegra EX5000...
  • Page 24 Pressing this button toggles the display between: Note: (For WSI weather) If you have an Avidyne MLB700 Sirius receiver installed, you have a WSI weather subscription. WSI's premium radar product is called NOWRAD, which is data derived from the NEXRAD doppler radar system and processed by WSI.
  • Page 25 • The word, “FAIL,” displays in the sensor's status line in yellow. • The sensor symbol changes from cyan to yellow (if the sensor was on). What to do: Select the Setup Page and perform Self-Test for the applicable sensor. 600-00102-000 Rev. 09 -11- Entegra EX5000...

  • Page 26: Map Page Symbols-Terrain And Position

    1) Data Blocks (Left & Right)—View navigation and engine (when equipped with engine monitor) data in data blocks in the upper corners of the display. For more information, see Section 8.4, "Data Block Edit Page" on page 71. Entegra EX5000 -12- 600-00102-000 Rev. 09...

  • Page 27: Table 2.1 Track Indicator Graphics

    4) Terrain Scale—Shows highest and lowest limits of terrain in displayed area. Legend colors in between these numerics represent terrain elevations. Blue obstacle clearance number shows the top of the highest obstacle, when greater than the 600-00102-000 Rev. 09 -13- Entegra EX5000...
  • Page 28 Lightning strikes from on-board sensors display for three minutes. Lightning display depends on the selected mode, as follows: Datalink Mode—If Broadcast Datalink is installed and you ■ have an appropriate broadcast datalink service level, shows Entegra EX5000 -14- 600-00102-000 Rev. 09...
  • Page 29 ■ 9) Compass Rose/Range Ring—Displays a 360-degree or 120- degree compass circle or arc and also indicates current range setting. The range number is the distance from the airplane symbol to the compass arc. 600-00102-000 Rev. 09 -15- Entegra EX5000...

  • Page 30: Map Page Symbols-Runways And Flight Plan

    When you select an approach procedure on the Garmin 430, all approach segments including holds, DME arcs, procedure turns, etc., are shown (when connected via the ARINC 429 bus). Entegra EX5000 -16- 600-00102-000 Rev. 09...
  • Page 31 When available, TIS installations will show a ground track “stinger” for each intruder, indicating the intruder’s track as measured by ground radar. Traffic Symbols are shown in Table 3.1 Traffic Symbols on page 24. 600-00102-000 Rev. 09 -17- Entegra EX5000...

  • Page 32: Map Orientation Control

    When the Map View is North-Up you need to pay more attention to locate traffic outside the aircraft. Set Map View to Center or Forward to display this data consistent with typical dedicated traffic and lightning sensor displays. Entegra EX5000 -18- 600-00102-000 Rev. 09...

  • Page 33: Errors Displayed On The Map Page

    ● The GPS (This would be a pass through of the heading from ● another source, such as an Avidyne PFD. The GPS does not determine heading). If an installed heading source becomes unavailable or invalid, the EX5000 will automatically switch to using GPS track for map alignment.
  • Page 34 The heading/track indicator will display a series of dashes (“---”). ● The map is oriented True North Up. ● What to do: Have the avionics wiring inspected. ● When heading/track is restored, Map will resume normal operations. Entegra EX5000 -20- 600-00102-000 Rev. 09...

  • Page 35: Traffic Mode And The Traffic Page

    View—Center, with heading (or track) up ● Range—5 NM ● Base Map—No terrain or political boundaries ● Declutter—No symbol or airspace depictions ● Lightning—Not displayed ● Flight Plan—Displayed ● Datalink Weather—Not displayed. ● Entegra EX5000 -21- 600-00102-000 Rev. 09...

  • Page 36: Figure 3.1 Map Page-Traffic Mode

    Note: Traffic limitations and operational ranges depend on the traffic sensor installed. For TAS or TCAD sensors, see the corresponding sensor Pilot Guide. For TIS sensors, see Section 1-3-5 of the Aeronautical Information Manual. Entegra EX5000 -22- 600-00102-000 Rev. 09...
  • Page 37 The available Traffic button modes are listed below. For more information on specific traffic sensor modes, consult the user documentation for your traffic sensor. Avidyne TAS600 series (including 9900BX) and Skywatch— ● Traffic modes are ABOVE, NORMAL, UNLIMTD, BELOW, and DSPLY OFF.

  • Page 38: Traffic Symbols

    1) Relative bearing of target. 2) Range in nautical miles. 3) Relative altitude, for example, -200 would be 200 feet below. For example, -200 would be 200 feet below your aircraft, as reported by the traffic sensor. Entegra EX5000 -24- 600-00102-000 Rev. 09...

  • Page 39: Tis Sensor Status

    TIS data is not available at the current aircraft location. SBY—The TIS sensor is in standby mode. ● DATA FAIL—The TIS sensor has reported an internal fault. ● Traffic information will be removed from display. 600-00102-000 Rev. 09 -25- Entegra EX5000...
  • Page 40 Traffic Mode and the Traffic Page This page intentionally left blank. Entegra EX5000 -26- 600-00102-000 Rev. 09...

  • Page 41: Cmax Chart Pages (Optional)

    4 CMax Chart Pages (Optional) CMax™ is an optional Avidyne feature that allows you to view Jeppesen Terminal Procedure charts on your EX5000. If CMax is installed on your aircraft, you can select Charts from the Page Bar to view the CMax charts. This section discusses the following topics: About CMax, page 27 ●...
  • Page 42 Any charts that have changes that are effective on a certain date are controlled within the data. The MFD will display the proper Chart data based on the current date and the effective date of the changes to the chart. Entegra EX5000 -28- 600-00102-000 Rev. 09...

  • Page 43: About Geo-Referenced Charts

    On landing, if the Chart Page is being displayed, the EX5000 will automatically switch to display the Airport diagram for the current location when the GPS Ground Speed drops below 50 knots. 600-00102-000 Rev. 09 -29- Entegra EX5000...

  • Page 44: Figure 4.1 Cmax Chart Page (Airport)

    If the chart is not geo- referenced, the globe symbol is crossed out. 4) Flight Plan Symbol—an FPL symbol indicates the option to display the current flight plan is turned on. If the display of flight Entegra EX5000 -30- 600-00102-000 Rev. 09...
  • Page 45 If you have panned the chart, zooming all the way out to the full-screen chart size also re-centers the chart on the screen. A typical approach procedure chart is shown in Figure 4.2: 600-00102-000 Rev. 09 -31- Entegra EX5000...

  • Page 46: Figure 4.2 Cmax Chart Page (Procedure)

    For Garmin 400W/500W software at Release 3 or later, if a parallel track is active, the parallel track leg will be displayed in white. Entegra EX5000 -32- 600-00102-000 Rev. 09...

  • Page 47: Cmax Views

    “preview pane” of the Plan View, which, although too small to read all chart details, gives the user a general overview of the approach for situational awareness. The flight plan and ownship symbol are also displayed on the preview pane. 600-00102-000 Rev. 09 -33- Entegra EX5000...

  • Page 48: Figure 4.3 Procedure Chart Views

    4 of 5 Minimums Shows the descent minimums for the approach. 5 of 5 Plan Includes a flight plan overlay if available Header View Profile View Minimums View Plan View Figure 4.3 Procedure Chart views Entegra EX5000 -34- 600-00102-000 Rev. 09...

  • Page 49: Airport Chart Views

    3 of 5 Runways Shows runway information for the airport. 4 of 5 Departure Displays specific departure procedure information. Full View Header View Runways View Departure View Figure 4.4 Airport Chart Views 600-00102-000 Rev. 09 -35- Entegra EX5000...

  • Page 50: Figure 4.5 Airport Departure Chart (Night View)

    Charts that cannot be split into smaller sections are shown as a complete chart, with the View button not displayed, since only one View type is available. Figure 4.5 Airport Departure Chart (Night View) Entegra EX5000 -36- 600-00102-000 Rev. 09...

  • Page 51: Cmax Selection Page

    Note: The EX5000 shows only those charts covered by your Chart data subscription. The Charts are listed in the Jeppesen chart index order. 600-00102-000 Rev. 09 -37- Entegra EX5000...
  • Page 52 Note: As a valid chart, the Airport diagram is listed in the Chart Selection list, however, it is not usually necessary to load the Airport chart, since it is always accessible on the Chart Page by pressing the Display Airport button. Entegra EX5000 -38- 600-00102-000 Rev. 09...

  • Page 53: Selecting An Airport

    A list of all charts available for the identified airport appears in the chart list area. The name of the airport in the Airport Entry Field is listed next to the entry field. 600-00102-000 Rev. 09 -39- Entegra EX5000...
  • Page 54 5) Select Knob—Use the right knob to select the character for the current cursor position when entering an airport identifier. The character selection scrolls through A to Z, 0 to 9, and common punctuation marks and symbols before returning to A. Entegra EX5000 -40- 600-00102-000 Rev. 09...

  • Page 55: Chart Notams Page

    NOTAMs. Note: Chart NOTAMs address changes to information contained on the charts, and do not include local or regional operational NOTAMs. Always obtain local and regional NOTAMS before any flight. 600-00102-000 Rev. 09 -41- Entegra EX5000...
  • Page 56 • Expected airports are not available for chart selection. If you observe any of these, reload the CMax chart data using the CMax Dataloader, described in the Avidyne CMax Data Update Guide or in the Jeppesen JeppView for MFD Quick Start Guide.

  • Page 57: Trip Page

    The destination line is always displayed. All flight plans are from the GPS. A “No Flightplan Available” message displays if there is no flight plan entered or if the GPS has failed. Figure 5.1 Trip Page Information Entegra EX5000 -43- 600-00102-000 Rev. 09...
  • Page 58 CMax Chart page. Chart icons only display for those airports for which you have JeppView subscription coverage. For more information, see Section 4.1, "About CMax" on page 27. Entegra EX5000 -44- 600-00102-000 Rev. 09...
  • Page 59 NEXRAD displays shown on the Map Page, as discussed in Section 2.2, "Map Page Symbols—Terrain and Position" on page 12. If Broadcast Datalink is installed, also displays the Datalink lightning colors 600-00102-000 Rev. 09 -45- Entegra EX5000...
  • Page 60 Aux Main Page and in the message bar. For example, if 91 minutes has elapsed since the last TAF data was received, a "Broadcast TAFs > 90 min" message will display Entegra EX5000 -46- 600-00102-000 Rev. 09...
  • Page 61 If you have an MLB700 Broadcast Datalink receiver, one ◆ of the following service levels appears on screen: Avidyne Performance, Avidyne Essentials or None. If you have an XM receiver, one of the following appears ◆ on screen: Aviator, Aviator Pro, or None.
  • Page 62 The XM Freezing Level forecast (see figure) displays the expected altitude of the freezing level for the waypoint, while the WSI Temperatures Aloft forecast provides temperature data for each winds aloft flight level. Entegra EX5000 -48- 600-00102-000 Rev. 09...
  • Page 63 9) Chart—If CMax approach charts are installed and available, provides a quick jump to the Chart Page with the highlighted airport pre-selected. For more information about CMax, see Section 4, "CMax Chart Pages (Optional) " on page 27. 600-00102-000 Rev. 09 -49- Entegra EX5000...
  • Page 64 Trip Page. Use the GPS as the primary source of navigation information for approach procedures. Consult your avionics installation facility to determine if your EX5000 is interfaced to the Garmin GNS- 430 via ARINC 429 or RS-232. Entegra EX5000 -50- 600-00102-000 Rev. 09...

  • Page 65: Nearest Page (Nrst)

    1) Airport details—By default, displays the following details about the airports nearest to your current location: METAR and Chart Symbols— Waypoints with METAR ■ reporting stations display a color-coded METAR flag when Datalink is active. If CMax approach charts are installed, a Entegra EX5000 -51- 600-00102-000 Rev. 09...
  • Page 66 5) FILTER—Press to see all airport types (SHOW ALL) or only the airport types as defined on the Airport Filter Page (ON) (see Section Figure 8.2, "Airport Filter Setup Page" on page 67). Filter is only visible on the Nearest Airport Pages. Entegra EX5000 -52- 600-00102-000 Rev. 09...
  • Page 67 For information about CMax, see Chapter 4 "CMax Chart Pages (Optional) .” 7) Select Knob—Use the right knob to move the cursor up or down to highlight a specific airport or other data type. 600-00102-000 Rev. 09 -53- Entegra EX5000...

  • Page 68: Airport Info Page

    Step and Jump labels appear on the left and right knobs: Step—Scrolls the page one line. ■ Jump—Scrolls an entire page (or to the end of the list). ■ Entegra EX5000 -54- 600-00102-000 Rev. 09...

  • Page 69: Checklists

    The EX5000 startup screen and the Aux Main Page display the currently loaded checklist version. While the checklist version reflects the current MFD software part number, checklists may be updated by Columbia in the future. Entegra EX5000 -55- 600-00102-000 Rev. 09...

  • Page 70: Normal Checklists

    Checklists 7.2 Normal Checklists Figure 7.1 Normal Procedure Checklist 1) Checklist Types—Provides access to the top-level Normal checklists by phase of flight: Before Takeoff ■ In Flight and Landing ■ Entegra EX5000 -56- 600-00102-000 Rev. 09...

  • Page 71: Figure 7.2 Normal Checklists

    4) Show Checklist—Press Show Checklist to view the highlighted checklist. 5) Selection Control—Use right knob to move the blue outlined box up or down to highlight a specific checklist within each menu for viewing. 600-00102-000 Rev. 09 -57- Entegra EX5000...

  • Page 72: Checklist Buttons And Knobs

    If an already-acknowledged checklist item is highlighted, the Done button will be relabeled Undo allowing the item to be reverted to the undone state. Back—Returns you to the menu of checklists in each type. Entegra EX5000 -58- 600-00102-000 Rev. 09...
  • Page 73 5) Selection Control—Once inside a Checklist, use the right knob to move up and down the checklist. The current step in the checklist is highlighted in magenta and has an arrow pointing to it from the right side. 600-00102-000 Rev. 09 -59- Entegra EX5000...

  • Page 74: Emergency Checklists

    Emergency checklists, press the Emerg. Checklist button in the lower left corner. Figure 7.3 Emergency Checklists 1) Checklist Types—Provides access to the top-level Emergency checklists for each phase of flight including: Ground Emergency ■ In-Flight Emergency ■ Landing Emergency ■ System Malfunctions ■ Entegra EX5000 -60- 600-00102-000 Rev. 09...
  • Page 75 2) Normal Checklist—Press Normal Checklist to return to the selection of normal operating checklists. 3) Available Checklists—Menu of checklists within each type. Push Show Checklist to display the desired list. 4) Show Checklist—Press Show Checklist to view the highlighted checklist. 600-00102-000 Rev. 09 -61- Entegra EX5000...
  • Page 76 Checklists 5) Selection Control—Use right knob to move the blue outlined box up or down to highlight a specific checklist within each menu for viewing. Entegra EX5000 -62- 600-00102-000 Rev. 09...

  • Page 77: Aux Page - Configuring The Ex5000

    Aux Main Page, page 64 ● Airport Filter Setup Page, page 67 ● Declutter Setup Page, page 69 ● Data Block Edit Page, page 71 ● System Time Page, page 73 ● Datalink Configuration Page, page 75 ● Entegra EX5000 -63- 600-00102-000 Rev. 09...

  • Page 78: Aux Main Page

    Main Page and in the message bar. For example, if 91 minutes has elapsed since the last TAF data was received, a "Broadcast TAFs > 90 min" message will display in the message bar and in Entegra EX5000 -64- 600-00102-000 Rev. 09...
  • Page 79 GPS1 and GPS2 to provide position information and flight plan data to the moving map. 7) Setup Menus—Buttons to select specific setup functions including Airport Filter, Declutter Settings, Data Block Editing, and System Time. 600-00102-000 Rev. 09 -65- Entegra EX5000...
  • Page 80 Aux Page – Configuring the EX5000 Scroll Knob—(Not shown) If there are more messages than fit on the current page, Scroll allows you to scroll the message list to see the remainder of the messages. Entegra EX5000 -66- 600-00102-000 Rev. 09...

  • Page 81: Airport Filter Setup Page

    Figure 8.2 Airport Filter Setup Page 1) Airport Type—Select Towered, Non-Towered, or both. 2) Surface—Select between hard, soft, and/or water surfaces. Note: To display airports with both hard surface and water runways check the hard surface box. 600-00102-000 Rev. 09 -67- Entegra EX5000...
  • Page 82 5) Cancel—Cancels any changes and returns to the Aux Main Page. 6) Change Knob—The left knob changes the value or status of the selected field. 7) Select Knob—The right knob moves the blue field selector. Entegra EX5000 -68- 600-00102-000 Rev. 09...

  • Page 83: Declutter Setup Page

    2) Display—Each item has three possible display settings: On—The item displays all the time. ■ Auto—The item displays automatically and declutters ■ automatically based on pixel density of the display at a given range. 600-00102-000 Rev. 09 -69- Entegra EX5000...
  • Page 84 400NM, Map performance may be slow, and in some cases, may cease to operate. If this occurs, you will need to recycle the EX5000 power to restore functionality. To avoid this situation, Avidyne suggests that you select the IFR or VFR Default declutter setting. Entegra EX5000 -70- 600-00102-000 Rev.

  • Page 85: Data Block Edit Page

    Map Pages. You can keep these data blocks at the default factory configuration or you can customize the data that appears in the data blocks. The factory default uses the data blocks as follows: 600-00102-000 Rev. 09 -71- Entegra EX5000...
  • Page 86 5) Cancel—Cancels any changes and returns to Aux Main Page. 6) Change Knob—The left knob changes the value or status of the selected field. 7) Select Knob—The right knob moves the green field selector. Entegra EX5000 -72- 600-00102-000 Rev. 09...

  • Page 87: System Time Page

    1) Time Source—Select the time source. If “Auto” is selected, the EX5000 will first try to receive current time data from the attached GPS unit. If the GPS signal is not available, it will try to receive 600-00102-000 Rev. 09 -73- Entegra EX5000...
  • Page 88 6) Cancel—Cancels any changes and returns to the Aux Main Page. 7) Change Knob—The left knob changes the value or status of the selected field. 8) Select Knob—The right knob moves the blue field selector. Entegra EX5000 -74- 600-00102-000 Rev. 09...

  • Page 89: Datalink Configuration Page

    Page displays. From the Datalink Messaging Page, press Datalink Setup to configure Multilink. For information about Datalink Messaging, see Section 10.9, "Datalink Messaging" on page 113. If Broadcast Datalink is not installed, the Datalink ■ Configuration Page displays directly. 600-00102-000 Rev. 09 -75- Entegra EX5000...

  • Page 90: Figure 8.6 Datalink Configuration Page

    Broadcast system is unable to do so. In addition, both Datalink Messaging and Flight Tracking require that Multilink be Enabled, although in these cases no weather data types need be selected. Entegra EX5000 -76- 600-00102-000 Rev. 09...
  • Page 91 6) Additional Data Reporting—Allows you to turn on or off the display of the following data on the Map Page: Text METARs ■ METAR Symbols ■ AIRMETs / SIGMETs ■ SUA Status ■ TFR Status ■ 600-00102-000 Rev. 09 -77- Entegra EX5000...
  • Page 92 9) Cancel—Returns to the previous page without saving your changes. 10) Change Knob—The left knob changes the value or status of the selected field. 11) Select Knob—The right knob moves the blue field selector. Entegra EX5000 -78- 600-00102-000 Rev. 09...

  • Page 93: Engine Page

    Most of the engine data is transmitted to the EX5000 via a remotely mounted data acquisition unit (DAU). The remaining data is either transmitted from the Entegra EXP5000 Primary Flight Display (PFD) or calculated by the Entegra EX5000. This section discusses the following topics: Engine Page Overview, page 79 ●...
  • Page 94 • If all indicators fail, check and/or cycle the circuit breaker for the engine DAU. If functionality is not restored, land as soon as practical and have a maintenance facility inspect the system. Entegra EX5000 -80- 600-00102-000 Rev. 09...

  • Page 95: Engine Page

    DAU. % Power—Indicates the current percent power being made ■ by the engine. For information about how % Power is calculated, see the Pilot’s Operating Handbook for your aircraft. 600-00102-000 Rev. 09 -81- Entegra EX5000...
  • Page 96 Econ—Displays the current fuel economy in nautical miles ■ per gallon based on the fuel flow as reported by the DAU and Entegra EX5000 -82- 600-00102-000 Rev. 09...
  • Page 97 In Normalized mode, the bar graph indicates overall changes in temperature. 7) Lean Assist—Begins the lean process as described in Section 9.4, "Columbia 350 Lean Assist" on page 86. 600-00102-000 Rev. 09 -83- Entegra EX5000...
  • Page 98 9) OAT—Indicates the ambient air temperature as reported by the PFD. Press OAT Units to change the display between degrees Fahrenheit and degrees Celsius. 10) Opens the Initial Usable Fuel Page, described on page 85. Entegra EX5000 -84- 600-00102-000 Rev. 09...

  • Page 99: Initial Usable Fuel Page

    To switch between US gallons or liters, press Fuel Units. When the desired amount has been entered, press Fuel Done to exit the Initial Usable Fuel Page. Figure 9.2 Columbia 400 Initial Usable Fuel Page 600-00102-000 Rev. 09 -85- Entegra EX5000...

  • Page 100: Columbia 350 Lean Assist

    5) At this point, begin to richen the mixture. 6) As the mixture is richened, the display will first annunciate “Looking for #5 to Peak (Rich),” and then “Peak Detected (Rich)” as it determines the peak temperature. Entegra EX5000 -86- 600-00102-000 Rev. 09...

  • Page 101: Leaning For Best Economy

    6) Continue leaning until the EX5000 annunciates “Best Economy” which will indicate that the best economy mixture has been achieved. 7) When you are happy with the engine lean setting, exit the Lean Assist function by pressing Normalize or Absolute. 600-00102-000 Rev. 09 -87- Entegra EX5000...

  • Page 102: Columbia 400 Lean Assist

    3) When the EX5000 has detected a peak in the TIT, it will annunciate “Best Power - Richen to - 50°” and the TIT bar graph will turn cyan, showing a differential temperature from the peak. Entegra EX5000 -88- 600-00102-000 Rev. 09...

  • Page 103: Leaning For Best Economy

    4) Continue to lean the mixture control, until the TIT bar graph shows a differential temperature from the peak of 50°. When the EX5000 approaches this condition, it will annunciate “Best Economy” 600-00102-000 Rev. 09 -89- Entegra EX5000...

  • Page 104: When You Are Happy With The Engine Lean Setting, Exit The Lean Assist Function By Pressing Normalize Or Absolute

    • As a precaution, the Lean Assist algorithm will not allow leaning past a TIT of 1700°. If 1700° is reached during leaning, the EX5000 will warn you to richen to -50° from that point. Entegra EX5000 -90- 600-00102-000 Rev. 09...

  • Page 105: Data Blocks On Map Page

    Engine Sensor Status Box The Engine Sensor Box provides numeric and graphical ● representations of the Fuel Quantity and EGT, if available. For more information, see Table 12.10 Data Block Information on page 139. 600-00102-000 Rev. 09 -91- Entegra EX5000...

  • Page 106: Emax Engine Monitor

    A Jeppesen Track file (.log), containing position data that is ● compatible with Jeppesen FliteStar. For more information about the FliteStar track file, see www.Jeppesen.com. For information about downloading EMax data from the EX5000, see Section 12.1, "Updating Your Databases" on page 122. Entegra EX5000 -92- 600-00102-000 Rev. 09...

  • Page 107: Using Datalink (Optional)

    ● Datalink Messaging, page 113 ● 10.1 About Datalink Services For the EX5000, Avidyne offers three types of Datalink service: Narrowcast Datalink—Narrowcast Datalink is provided via a ● built-in transceiver that uses two-way messaging and receives data from the ORBCOMM satellite system. For more information, see Section 10.3, "About Narrowcast Datalink"...

  • Page 108: Overview Of Datalink Weather

    Narrowcast Datalink can also provide the effective times and dates of the Special Use Airspace (SUA) contained in the EX5000’s navigation database, allowing the Map Page to differentiate between active (“hot”) and inactive (“cold”) areas. Entegra EX5000 -94- 600-00102-000 Rev. 09...
  • Page 109 “see” a satellite). For information about setting up Datalink, see Section 8.6, "Datalink Configuration Page" on page 75. 600-00102-000 Rev. 09 -95- Entegra EX5000...

  • Page 110: About Narrowcast Datalink

    Narrowcast uses two-way messaging to send your flight plan to the Avidyne Network Operations Center (NOC), which then sends you only the data pertinent to your flight and provides a web-based flight tracking capability. Due to variability in the ORBCOMM satellite signal used by Narrowcast, weather update rates may vary.

  • Page 111: Loss Of Satellite Coverage

    There is no pilot action that can be taken to re-acquire a satellite in the event of satellite and/or network problems. The EX5000 will continue to try to acquire satellites as long as Datalink is enabled. Normal operation will automatically resume once a satellite is re- acquired. 600-00102-000 Rev. 09 -97- Entegra EX5000...

  • Page 112: About Broadcast Datalink

    United States. Outside this area, weather information is not provided. The boundary of the coverage area is shown on the Map Page as a “hatched” pattern (See Figure 10.1). Figure 10.1 Broadcast Datalink Weather Boundaries Entegra EX5000 -98- 600-00102-000 Rev. 09...

  • Page 113: How The Mfd Handles Partially Missing Wsi Messages

    If a NEXRAD update is missing a tile, but the MFD has received all the data in a 360 nm radius around the aircraft's present position, the MFD displays the radar image on the Map. The MFD displays any missing data as "no data" hash marks. 600-00102-000 Rev. 09 -99- Entegra EX5000...

  • Page 114: Map Page With Datalink Weather

    NEXRAD radar image, is shown on the bottom line of the upper block. If optional sensors are installed, the Datalink sensor icon is displayed in the lower left portion of the screen. Entegra EX5000 -100- 600-00102-000 Rev. 09...
  • Page 115 — The (+) plus option shows broadcast ■ NEXRAD overlay with storm cell icons. This option may not be available depending on your broadcast subscription level. DSPLY OFF — Removes all NEXRAD data from the map ■ display. 600-00102-000 Rev. 09 -101- Entegra EX5000...

  • Page 116: Symbols Displayed Using Datalink

    METAR flag indicates the current conditions at that airport: AIRMETs/SIGMETs—Depending on your broadcast service ● level, AIRMETs and SIGMETs are shown as ribbed lines enclosing the area of the advisory and are color coded and Entegra EX5000 -102- 600-00102-000 Rev. 09...
  • Page 117 Broadcast Datalink. TFRs are shown with solid red lines on the Map Page. Note that at a full Map Declutter setting (all navigation data and airspace removed), TFRs will also be removed from the display. 600-00102-000 Rev. 09 -103- Entegra EX5000...

  • Page 118: Using Datalink Without A Traffic Sensor

    If either METAR or AIRMET/SIGMET displays are disabled on the Datalink Configuration Page, the corresponding button does not display on the Map Page. For more information, see Section 8.6, "Datalink Configuration Page" on page 75. Entegra EX5000 -104- 600-00102-000 Rev. 09...

  • Page 119: Trip Page With Datalink Weather

    Figure 10.5 Trip Page with Datalink Weather For information about Datalink weather on the Trip Page, see the Display button description in Chapter 5 "Trip Page.” 600-00102-000 Rev. 09 -105- Entegra EX5000...

  • Page 120: Nearest Page With Datalink Weather

    Nearest Page. Figure 10.6 Nearest Page with Broadcast Datalink For more information about the Nearest Page, see Chapter 6 "Nearest Page (NRST) on page 51. Entegra EX5000 -106- 600-00102-000 Rev. 09...

  • Page 121: About Multilink

    About Multilink 10.8 About Multilink The Avidyne Multilink feature leverages the capabilities of the internal Narrowcast Datalink receiver when Broadcast Datalink is also installed. Multilink expands the weather coverage areas, as well as adding new features such as Datalink Messaging.

  • Page 122: Using Multilink Features

    Using Multilink Features Expanded Coverage—When Multilink is enabled, the EX5000 ● sends the current destination and flight plan to the Avidyne Network Operations Center (NOC) just as it does with standard Narrowcast. On a Multilink-enabled unit, however, the NOC only starts sending weather data if it determines that the desired Narrowcast coverage area extends outside of CONUS.

  • Page 123: Figure 10.7 Broadcast Datalink Nexrad Coverage

    Broadcast or from Narrowcast. No specific action is required to choose between Datalink systems for this data. Note: The following images are from a different model of the Avidyne MFD, but the concepts shown are identical. Figure 10.7 Broadcast Datalink NEXRAD Coverage Figure 10.8 Narrowcast and Broadcast Datalink...

  • Page 124: Figure 10.9 Broadcast Datalink, Without Canadian Metars

    Broadcast Datalink. Note the expanded graphical METAR coverage in Canada provided by the Multilink system in the following images: Figure 10.9 Broadcast Datalink, without Canadian METARs Figure 10.10 Multilink Datalink with Canadian METAR flags Entegra EX5000 -110- 600-00102-000 Rev. 09...

  • Page 125: Optimizing Your Multilink Setup

    CONUS, and it initiates full weather service via Narrowcast. A better Coverage Area setting might be “Current Position” and “200 nm”. With these values, the NOC will not send Narrowcast weather data for this flight unless the Broadcast system fails. 600-00102-000 Rev. 09 -111- Entegra EX5000...

  • Page 126: Multilink Usage Guidelines

    Datalink Messaging and Flight Tracking available on all flights, you can de-select all weather types but leave Multilink enabled. This will cause the system to use a minimum of Narrowcast data on each flight for session management and position reporting. Entegra EX5000 -112- 600-00102-000 Rev. 09...

  • Page 127: Datalink Messaging

    Aux Page. If the Aux Page is set to the System view, press Datalink to change to the Datalink view. Note: Avidyne cannot guarantee the privacy of your Datalink Messaging communications. For more information, see the Avidyne Privacy Policy.

  • Page 128: Messaging Knobs And Buttons

    Using Datalink (Optional) Messaging Knobs and Buttons The Datalink Messaging Page consists of a message display area, a text entry box and several buttons. Figure 10.12 Datalink Messaging Knobs and Buttons Entegra EX5000 -114- 600-00102-000 Rev. 09...

  • Page 129: Table 10.1 Message Status Indicators

    White Messages entered into the EX5000 for transmission. Blue Messages received from Avidyne’s Network Operations Center. 4) System Setup—Displays the Aux Main Page. The selected view (Datalink or System Setup) is retained when returning to the Aux Page from any other page.
  • Page 130 Scroll Up / Scroll Down buttons—These buttons appear if the message display area is full and new messages are sent or received. Press either button to scroll the message display area up or down by one full message. Entegra EX5000 -116- 600-00102-000 Rev. 09...

  • Page 131: Using Datalink Messaging

    Note: Messages sent from the ground to the airplane will be re-attempted for 24 hours. It is possible to miss a message that was sent after landing, for example, and receive it the next day. 600-00102-000 Rev. 09 -117- Entegra EX5000...

  • Page 132: Figure 10.13 Receiving A Datalink Message

    To view the new message, turn to the Aux Page and select the Datalink view if it is not already present. The full text of the new message displays in the message display area. Entegra EX5000 -118- 600-00102-000 Rev. 09...

  • Page 133: Using The Ex5000 Outside The Us

    Datalink), and therefore the EX5000 Datalink features, are not currently available outside CONUS. Narrowcast Weather—While Narrowcast weather can be ● received worldwide, Avidyne only provides data for North America (including the United States and Canada). Multilink—Because Broadcast Datalink and Narrowcast Datalink ●...

  • Page 134: Features Specific To International Flight

    MFD. An International Conversion Utility is available from Avidyne that changes the MFD terrain data between Americas and International. The utility can be installed in the field at an Avidyne Authorized Entegra Service Center. For information about the International Conversion Utility contact Avidyne Technical Support.

  • Page 135: Reference

    Nav Messages, page 141 ● Traffic Messages, page 143 ● Lightning Messages, page 145 ● Engine Messages, page 148 ● PFD Messages, page 149 ● Narrowcast Datalink Messages, page 150 ● Broadcast Datalink Messages, page 152 ● Entegra EX5000 -121- 600-00102-000 Rev. 09...

  • Page 136: Updating Your Databases

    Reference 12.1 Updating Your Databases Avidyne makes use of three different types of data that can be uploaded to or downloaded from your EX5000: NavData—For the Map Page, Avidyne uses NavData from ● Jeppesen Sanderson, Inc. it is your duty as pilot in command to ensure that the data you fly with remains up to date.

  • Page 137: Loading Navdata (The Navigation Database)

    MFD. Unplugging the Zip Drive with the disk still engaged may cause damage to the disk. If using a USB Flash Memory: • Avidyne strongly suggests that, to avoid confusion, you reserve a USB Flash Memory Drive solely for EX5000 database transfers.
  • Page 138 Reference Once you have downloaded the Nav from your PC to either a Zip Disk Dataloader or USB Flash Memory Drive, as described in the Avidyne Data Update Guide, you will need to upload the data to your EX5000. ➤...

  • Page 139: Loading Cmax Chart Data

    250 MB. Once you have downloaded the CMax data from your PC to either a Zip Disk Dataloader or USB Flash Memory Drive, as described in the Avidyne Data Update Guide, you will need to upload the data to your EX5000.

  • Page 140: Downloading Emax Data

    Letting the Dataloader dangle can cause permanent damage to the data port. It can also cause an intermittent connection, which will result in an unsuccessful data download. 3) Turn on the master switch (which turns on the EX5000). Entegra EX5000 -126- 600-00102-000 Rev. 09...
  • Page 141 This step ensures that all data has been checked in self-test, and the MFD is ready for use 9) You can now bring the Zip Drive or USB Flash Memory Drive to your PC and download the EMax data. See the Avidyne Data Update Guide for more information. 600-00102-000 Rev. 09...

  • Page 142: Purchasing And Activating Broadcast Datalink Service

    The Weather Service Package you want. (The details are ● available at www.MyAvidyne.com.) Choose the Satellite Weather service you want based on the weather data products you would like to receive. EX5000 unit serial number ● Entegra EX5000 -128- 600-00102-000 Rev. 09...

  • Page 143: Activating Wsi Wx Satellite Weather

    Broadcast activation is recorded by the Avidyne Network Operations Center (NOC). If 24 hours pass before you can get to your aircraft, contact Avidyne to have another test signal sent to your aircraft. Note: The EX500’s Service Level indication might take several flights to synchronize to the correct level, but you will still receive and see the weather products you have purchased.

  • Page 144: Setting Up A Sirius Audio Account

    ● www.sirius.com). Choose the Audio service you want based on the channels that you would like to receive. Audio s/n - please power up your Avidyne Remote Control and ● the s/n is located on the first screen. Credit Card Information ●...

  • Page 145: Activating Your Account

    Enter your XM WX ID number to enable the activation code for an additional 24 hours. For problems relating to your receiver, contact Heads Up Technologies: E-mail: service@heads-up.com Phone: (972) 980-4890 Ext. 142. 600-00102-000 Rev. 09 -131- Entegra EX5000...

  • Page 146: Cleaning The Ex5000 Screen

    Using any other chemicals or materials voids the warranty. The EX5000 screen is made of a plastic film that is vulnerable to scratches, damage by a sharp articles or improper cleaners. Use care when cleaning. Entegra EX5000 -132- 600-00102-000 Rev. 09...

  • Page 147: Sensor Status Block Symbols

    Traffic A hollow yellow symbol indicates that the function is not able to display data due to the same reasons as above, and is turned Lightning off from display on the Map Page. 600-00102-000 Rev. 09 -133- Entegra EX5000...

  • Page 148: Table 12.2 Broadcast Datalink Sensor Status Block (Optional)

    Marginal, Weak, or None. An animated yellow arrow indicates that NEXRAD imagery is selected for display, but it is not shown because the NEXRAD data is invalid. The broadcast signal quality is Good. Entegra EX5000 -134- 600-00102-000 Rev. 09...

  • Page 149: Map Symbols

    Water Towered Towered Non-Towered Non-Towered Notes: • The larger airport symbols are displayed as the map scales are reduced to the smaller ranges. • Airport types are derived directly from the Jeppesen navigation database. 600-00102-000 Rev. 09 -135- Entegra EX5000...

  • Page 150: Table 12.4 Map Symbols - Navigational Fixes

    (inactive leg) 1NM of each other >= 200° AGL < 1000° AGL Map Orientation Single Obstacle >= 1000° Ownship Symbol Obstacles within 1NM of each other >= 1000° AGL Flight Plan, Course Interstate Highway Waypoints Entegra EX5000 -136- 600-00102-000 Rev. 09...

  • Page 151: Line Styles

    Note: For adjacent or overlaying types of Special Use Airspace (e.g. Restricted Areas or Prohibited Areas within larger MOAs), some masking of the border lines may occur. See current aeronautical charts for accurate boundaries. 600-00102-000 Rev. 09 -137- Entegra EX5000...

  • Page 152: Table 12.9 Airmet And Sigmet Boundary Lines

    Table 12.9 AIRMET and SIGMET Boundary Lines Line Color Type Label Bright blue Mountain AIRMET Dark yellow IFR AIRMET Orange Turbulence AIRMET TURB Blue Icing AIRMET Dark Red SIGMET AIRMET Blue grey Convective SIGMET CSIG Entegra EX5000 -138- 600-00102-000 Rev. 09...

  • Page 153: Data Blocks

    UTC TIME UTC (Greenwich or “Zulu”) time. 0 to 23h 59m 59s LOCAL Local data and time. Derived from UTC 0 to 23h 59m 59s TIME time with time zone setting applied. Blank Blank space 600-00102-000 Rev. 09 -139- Entegra EX5000...

  • Page 154: Table 12.11 Engine Instrument Data Block Information

    -40ºC to 100ºC -40ºF to 131º F -40ºC to 55ºC Electrical Bus Voltage (Volts) and 0 - 36 VDC 0 - 18 VDC Alternator outputs (Amps) 0 - 99 A Battery Output (Amps) -99 - +100A Entegra EX5000 -140- 600-00102-000 Rev. 09...

  • Page 155: Nav Messages

    Authorized Service presented on the Radar Center check GPS/ display. FMS and installation Nav Source: Can't The GPS/FMS interface Have an Avidyne Open Port cannot open the assigned Entegra Authorized port. Generally indicates a Service Center configuration error. check configuration...
  • Page 156 Recommended NAV Messages and Meaning Pilot Action Colors Heading Data is GPS/FMS is configured as Have an Avidyne NOT Valid the Map heading source and Entegra Authorized that data ceases to be Service Center available or becomes invalid. check configuration...

  • Page 157: Traffic Messages

    Dedicated Traffic Page altitude information. and begin looking for traffic. Traffic Sensor is in EX5000 receives a “Stand- Have an Avidyne Stand- By By” transmission from the Entegra Authorized traffic sensor. Press Service Center check “Traffic” button to select a configuration and traffic mode.
  • Page 158 Reference Table 12.13 Traffic Messages (Continued) Traffic Messages Meaning Recommended & Colors Pilot Action TCAD Altitude TCAD sensor is not Have an Avidyne Unavailable receiving altitude Entegra Authorized information. Service Center check configuration and installation Traffic Heading TAS/ TCAS is configured...

  • Page 159: Lightning Messages

    Operating Normally operating in a normal state from a recoverable fault that was previously acknowledged. Lightning Sensor is Lightning source is in Have an Avidyne in Noise- Monitor Noise- Monitor Mode. Entegra Authorized Mode Service Center check configuration and installation.
  • Page 160 Table 12.14 Lightning Messages (Continued) Lightning Meaning Recommended Pilot Messages & Colors Action Lightning Heading Stormscope is configured Have an Avidyne Source Failed as a heading source and Entegra Authorized a “fatal heading fault” is Service Center check received. configuration and installation.
  • Page 161 Recommended Pilot Messages & Colors Action Noise Present The TWX670 has Have configuration (TWX670 only) detected excessive check at an Avidyne noise in the system. Authorized Entegra Accuracy and Service Center. efficiency of the lightning sensor may be negatively affected.

  • Page 162: Engine Messages

    Normally state from a recoverable fault that was previously acknowledged. Engine Sensor MFD receiving no Have an Avidyne Entegra Unit is Not data from Engine Authorized Service Center Communicating DAU. check configuration and installation. Engine Sensor...

  • Page 163: Pfd Messages

    Acknowledge. Normally normal state from a recoverable fault that was previously acknowledged. PFD is Not MFD is receiving no Have an Avidyne Entegra Communicating data from PFD Authorized Service Center check configuration and installation. 600-00102-000 Rev. 09 -149- Entegra EX5000...

  • Page 164: Narrowcast Datalink Messages

    Datalink Sensor COMM port is configured Restart system. If Configuration Error incorrectly. problem persists, contact Avidyne. Datalink Sensor Data EX5000 receives a Have an Avidyne is Invalid “recoverable fault” Entegra Authorized notification. Service Center check configuration and installation. Narrowcast METAR METARs are older than Acknowledge.
  • Page 165 15 minutes of the initial Datalink update. Datalink: Idle No data being sent or None necessary. received. NXR Invalid NEXRAD temporarily not Wait for next able to be displayed. NEXRAD update. 600-00102-000 Rev. 09 -151- Entegra EX5000...

  • Page 166: Broadcast Datalink Messages

    Broadcast Winds The EX5000 did not Monitor Broadcast Aloft not yet received receive Winds Aloft data system during flight, within the first 15 minutes have system inspected after power-on. if performance does not improve. Entegra EX5000 -152- 600-00102-000 Rev. 09...
  • Page 167 Broadcast Lightning The EX5000 did not Monitor Broadcast not yet received receive Lightning data system during flight, within the first 15 minutes have system inspected after power-on. if performance does not improve. 600-00102-000 Rev. 09 -153- Entegra EX5000...
  • Page 168 Broadcast Winds data Monitor Broadcast Aloft > 90 min age since creation is system during flight, greater than 90 minutes. have system inspected Winds data can no longer if performance does not be displayed. improve. Entegra EX5000 -154- 600-00102-000 Rev. 09...
  • Page 169 Monitor Broadcast Aloft > 90 min data age since creation is system during flight, (WSI Only) greater than 90 minutes. have system inspected Freezing Level data will if performance does not not be displayed. improve. 600-00102-000 Rev. 09 -155- Entegra EX5000...

  • Page 170: Avionics Abbreviations

    Special Use Airspace Traffic Advisory TACAN Tactical Air Navigation Terminal Aerodrome Forecasts Traffic Advisory System True Air Speed TAWS Terrain Awareness and Warning System TCAD Traffic and Collision Alert Device TCAS Traffic Alert Collision Avoidance System Entegra EX5000 -156- 600-00102-000 Rev. 09...
  • Page 171 Avionics Abbreviations Table 12.19 Avionics Abbreviations (Continued) Abbreviation Meaning Temporary Flight Restrictions Universal Coordinated Time. (Same as Zulu, Greenwich Mean Time, or GMT) Visual Flight Rules VHF Omnidirectional Radio Beacon Weather 600-00102-000 Rev. 09 -157- Entegra EX5000...
  • Page 172 Reference This page intentionally left blank. Entegra EX5000 -158- 600-00102-000 Rev. 09...
  • Page 173 Copyright This document is applicable to Software Part Number 530-00195-200. Copyright © 2008 Avidyne Corporation. All rights reserved. All trademarks and trade names are the property of their respective owners. All materials are copyrighted including images that represent this software. This manual has been provided pursuant to an agreement containing restrictions on its use.
  • Page 174 (c) The Product has not been altered in any manner other than as previously authorized by Avidyne in writing; and (d) Repairs to the Product have not been made by anyone other than Avidyne or an Avidyne authorized service facility.
  • Page 175 RELATED TO PRODUCTS NOT MANUFACTURED BY AVIDYNE OR REGARDING OR RELATED TO THE PERFORMANCE OR RELIABILITY OF ANY SUCH PRODUCT, EITHER ALONE OR WHEN USED WITH ANY PRODUCT MANUFACTURED BY AVIDYNE, OR THE SUITABILITY OF ANY SUCH PRODUCT FOR USE WITH ANY PRODUCT MANUFACTURED BY AVIDYNE.
  • Page 176 THE FOREGOING PARAGRAPHS DEFINE AND LIMIT AVIDYNE'S SOLE RESPONSIBILITY AND LIABILITY AND PURCHASER'S SOLE AND EXCLUSIVE REMEDIES RELATED TO THE PRODUCT. Some jurisdictions may not allow the exclusion or limitation of warranties or liabilities, in which case the above limitations or exclusions, or some of them, may not apply in those jurisdictions.

  • Page 177: Software License

    License and Certain Restrictions You may use the Software on the Entegra EX5000 on which it was delivered. You may not copy the Software for any purpose. You may not transfer the Software or any rights under this Agreement to another party without this Agreement.
  • Page 178 Computer Software clause at DFARS 52.227-7013, and when applicable subparagraphs (a) through (d) of the Commercial Computer-Restricted rights clause at FAR 52.227-19, and in similar clauses in the NASA FAR Supplement. - Avidyne Corporation, 55 Old Bedford Road, Lincoln, MA 01773. Export Law Assurances...
  • Page 179 If you do not agree to the terms of this license, Avidyne is unwilling to license the product to you. In such event, you may not use or copy the product, and you should promptly contact Avidyne for instructions on return of the unused product(s) for a refund.
  • Page 180 This page intentionally left blank. Entegra EX5000 -166- 600-00102-000 Rev. 09...
  • Page 182 AVIDYNE CORPORATION 55 Old Bedford Road Lincoln, MA 01773 Telephone: 781-402-7400 Toll Free: 800-AVIDYNE (800-284-3963) FAX:781-402-7599 www.avidyne.com P/N 600-00102-000 Rev. 09 May 5, 2008...

Table of Contents