Connection To The Mains Supply - IAG IOE6SE2 User Manual

Installation & Operation Manual for IOE6SE2 oven
Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of
electric shock.

CONNECTION TO THE MAINS SUPPLY

THE APPLIANCE MUST BE CONNECTED ACCORDANCE WITH THE RULES CURRENTLY.
IN FORCE, AND ONLY BY AN AUTHORIZED ELECTRICAL INSTALLER.
WARNING: THIS APPLIANCE MUST BE EARTHED
Check that the power rating of the mains supply and of the sockets are suitable for the maximum
power of the appliance as indicated on the specification plate.
Plug should be accessible after installation. Fit the plug into a socket fitted with a third contact
which corresponds with the earth connection. This should be properly connected.
If the appliance just fitted with supply leads but does not come already fitted with a plug, then
permanently connect to fixed wiring as follow:
The "yellow/green" earth wire, which must be connected to terminal, has to be about 10mm longer
than the other wires; the "blue" neutral wire has to be connected to the terminal marked with letter
N.
"Black, brown, red" live wires have to be connected to terminal L. Mains connection can also be
made by fitting a double pole switch with a minimum gap between the contacts of 3mm,
proportionate to the load and complying with the regulations in force.
The yellow/green earth wire should not be controlled by the switch.
The plug or a double pole switch used for mains supply connection should be easy to get at, once
the appliance is in position.
Important: position the mains supply cable so that it is never subjected to a temperature which is
more than 50℃ above ambient temperature.
The electrical safety of the appliance can only be guaranteed when it has been correctly
connected to an efficient earthed power supply, as laid down in the regulations for electrical
safety.
Important: the manufacturer cannot be held responsible for any damage to persons or objects due
to lack of an earth connection.