Electrical Connection - IAG IOS6WE3 Installation And Operation Manual

ELECTRICAL CONNECTION

The appliance must be installed by a suitably qualified person in accordance with
these instructions and with the requirements of the Australian Wiring Rules AS/NZS 3000.
Fixed wired installations are to be provided with suitable isolation means in accordance with the said rules.
Any plug socket installed for the purpose of connecting the appliance to supply must be readily accessible
when the appliance is installed.
Before making the connection, make sure that:
1) the safety circuit-breaker and the electrical system are able to withstand the load of the appliance
(see nameplate).
2) the power supply system has an earth connection in good working order in accordance with the regulations
in force;
IMPORTANT
2
Electric power ....................1,5 mm core cable (15 amp. Fuse required)
Should conform to local authority requirements.
Also refer to rangehood manufacturers recommendations.
WARNING: THIS APPLIANCE MUST BE EARTHED.
5