Settings For Motorised Antennas (Diseqc 1.2) - Beko 42BLE5520BN Operating Instructions Manual

Table of Contents

Advertisement

SPECIAL­SETTINGS
Notes:
Use installation equipment supported /
7
suggested by your Multiswitch.
Other users / receivers connected to the
7
system may be affected if the specified user
band number and frequency is changed
during installation.
User band and User band frequency is
7
specified on the Multiswitch used; and
each user / receiver uses a specified user
band and user band frequency.
With SCR satellite system, auto search by
7
several users / receivers at the same time
may cause problems.
– » 22 KHz«: Depending on the LNB type,
22 kHz audio is selected. For a univer-
sal LNB, this option is set to »Auto« and
c annot be changed.
– » DISEqC mode« and »LNB selection«:
depending on the type of antenna used,
<
>
use »
« or »
» DiSEqC 1.0« or »DiSEqC 1.1«.
» Off«: for a satellite system with only
one antenna.
» D iSEqC 1.0«: allows up to four satel-
lites to be received simultaneously.
U nder »LNB selection«, use »
>
»
« to select the option »1/4«, »2/4«,
»3/4« or »4/4«.
» D iSEqC 1.1«: allows up to 16 satel-
lites to be received simultaneously.
U nder »LNB selection«, use »
>
»
« to select the option »1/16« to
»16/16«.
5 Press »EXIT« to end the setting.
­ 5 0
ENGLISH
­ - ---------------------------------------------------------------------------------------------------------
« select the option »Off«,
<
<
Settings­for­motorised­antennas­
(DiSEqC­1.2)
Your television set supports motorised satellite
systems in compliance with DiSEqC 1.2. This
function allows the satellite antenna to be oper-
ated via the television set.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
« or »
V
– T he »SOURCE SETUP« menu appears.
3 Select the line »Antenna Settings« with »
or »
« and press »OK« to confirm.
Λ
4 Select the line »DiSEqC Mode« with »
»
«. Select the option »DiSEqC1.2« with
Λ
<
>
»
« or »
– T he line »DiSEqC 1.2 SETTINGS« is active.
Notes:
Additional operations are explained in the
7
following sections.
The following description about the DiSEqC
7
1.2 settings premise a substantial expertise
about the satellite systems. Ask your
specialist dealer.
« or
« or
« and press »OK« to confirm.
Λ
«
«
V
« or
V

Advertisement

Table of Contents
loading

Table of Contents