Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beko 37WLU530HID
Summary of Contents for Beko 37WLU530HID
- Page 1 INTEGRATED DIGITAL HD READY COLOUR TELEVISIONS 37WLU530HID Operating Instructions...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1-Important Information ... 1 1.1-Cleaning the screen and cabinet..1 1.2-Disposing of your TV at the end of service life..1 1.3-Superior features of your integrated digital television ...1 1.4-Receiving digital broadcasting channels ...1 1.5-Changing the plug ...2 2-Features of your new television ... -
Page 3: 1-Important Information
Important Information LCD panels are produced with state-of-the-art technology. However, there may be missing or lit spots on the screen under certain circumstances. That does not mean that the product is faulty. 1.1-Cleaning the screen and cabinet... After powering off, wipe the screen and the cabinet clean with a soft and dry cloth. We recommend that you do not use patented polishes or solvents on the screen or cabinet since they may cause damage. -
Page 4: Changing The Plug
1.5-Changing the plug The supplied mains cable already has a mains plug fitted, however should you need to replace it at any time please refer to the appropriate wiring information below for your particular cable. -
Page 5: 2-Features Of Your New Television
Features of your new television We would like this product, which has been manufactured in modern facilities in accordance with total quality principles, to offer you the best performance. Therefore, we would like you to read this entire manual carefully before you use your product and keep it for future reference. 2.1-Special Features •... -
Page 6: 3-Important Safety Instructions
Important Safety Instructions This symbol is used to warn the user about the “dangerous voltage” contained inside the housing of the product that may create a risk of electrical shock. This symbol is used to remind the user important usage and service instructions supplied with the TV. - Page 7 10) Never operate your TV close to water. Operating your TV, for example, near a bathtub, washbasin, kitchen washbasin, washing basin, wet basement and swimming pool can cause fire or electric shock. • Do not allow your TV to get wet. Never pour any liquids onto the TV.
- Page 8 18) Wipe the TV cabinet clean with a soft and dry cloth. Wipe dust from the screen gently with a soft cloth. Stubborn stains can be cleaned with a cloth slightly moistened with soap and lukewarm water. Never use solvents such as thinner or gasoline for cleaning.
-
Page 9: 4-Start
Start Remove your television carefully from its box. You can keep the packaging of your television to use in future. Contents of the box Power cable Remote control 2 batteries Instruction book Note: Scart, HDMI, VGA and PHONO cables are not supplied with the device. 4.1-Aerial connection 4.2-Powering on your device and the initial use... -
Page 10: 5-Your New Television
Your new television 5.1-TV Control Panel Program Down/Up button Menu button/Source selection button Power/Standby button 5.2-Rear and Side External Connections 1 Component video input (Y) 2 Component audio input (L) 3 Component video input (Pb) 4 Component audio input (R) 5 Component video input (Pr) 6 SPDIF Digital audio output 7 VGA (PC connection) input... -
Page 11: Remote Control
5.3-Remote Control (A) Analog mode only (D): Digital Mode Only. Note: When there is no menu open on the screen, up/down movement buttons have the same function with the PR+/PR- buttons and left/right movement buttons have the same function with the Vol+/ Vol- buttons. -
Page 12: 6-Performing The Initial Power-On Settings
Performing the initial power-on settings 6.1-TV controls 6.1.1-Temporary on/off (STAND-BY) When you press the red STANDBY button located on your remote control while your television is switched on, the sound and the picture will go off. In the stand-by mode, the power indicator of your television will glow brighter. -
Page 13: Turning On Your Television For The First Time And Tuning
6.2-Turning on your television for the first time and tuning Installation Guide menu will be displayed on the screen when you turn on your television for the first time. Installation Guide Language Settings English Active antenna power Auto tuning Select Press Right/Left movement buttons to select the desired menu language from the Language tab. -
Page 14: Performing Analogue Channel Settings
ADDITIONAL INFORMATION Please note that Encrypted channels may not be stored after scanning in the Digital TV channels. If this is the case then you will need to rescan the channels again but this time change the LIST SCRAMBLED CHANNELS from AUTO to ON: Press Menu. -
Page 15: Electronic Tv Guide (Epg)
6.4.2-Manual tuning of analogue channels and storing in the memory 6.4.2.1-If you already know the channel number Select Analogue Manual Tuning by pressing the Up/Down movement buttons in the CHANNEL SETUP menu and confirm by pressing the OK button. Analogue Manual Tuning menu will be displayed. Analogue Manual Tuning System Channel... -
Page 16: Program Table
No Information No Information ALL CHANNELS Wednesday 18 Jun 2008 Channel 1 No Information Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Previous Day Select Schedule List Important Note: Not all broadcasting enterprises supply a detailed TV guide. Most of the broadcasting enterprises provide daily program information, but they do not give detailed explanations. - Page 17 created. To do this, press the FAV button on your remote control. Favourite List menu will be displayed. Favourite List ALL CHANNELS FAV1 FAV2 FAV3 FAV4 Select one of the ALL CHANNELS, FAV1, FAV2, FAV3, FAV4 lists by pressing the Up/ Down movement buttons and press OK button to confirm.
-
Page 18: Signal Information
6.6.8-Channel List If you press OK button when no menu is open, Channel List menu will be displayed on the screen. CHANNEL LİST Channel 1 Channel 2 Channel 3 Channel 4 Select You can see all the channels of the current mode while you are in the Channel List menu, you can select the desired channel with Up/Down buttons and view it by... -
Page 19: 7-The Settings On Your New Television
The settings on your new television 7.1-Performing the Sound settings You may perform Volume settings by using the V+ or V- buttons on your television or the VOL+/VOL- buttons on your remote control. You can perform other Sound settings by entering the Sound menu. -
Page 20: Performing The Picture Settings
7.1.6-Headphone By connecting headphones to your television you can listen to the program sounds independently from your television. To turn up and down the headphone volume level, select Headphone tab from the Sound menu and adjust the volume level by using the Right/Left movement buttons. - Page 21 7.2.5.1-DNR (Noise reduction) You may reduce interference and noise formed in the picture by using this feature. Select DNR tab with the Up/Down movement buttons to activate this feature and select one of the Off, Low, Normal, High or Auto options with Right/Left movement buttons.
-
Page 22: Performing The Timer Settings
7.2.6.3-14:9 This is a movie format. 7.2.6.4-4:3 Use this setting to watch the broadcasts in the 4:3 format. 7.2.6.5-Subtitle If the subtitles are transmitted in the “16:9 formatted” broadcast, then this setting will push the picture upwards in order to ensure the entire written text to be seen. -
Page 23: Options Menu Settings
7.3.2-Off Time Select the Off Time tab by pressing the Up/ Down movement button in TIMER menu and confirm your selection with the Right movement button or OK button. In this menu, you can set the off time for your television with weekly or daily periods. -
Page 24: Parental Control
7.4.3- Country You can not access the Country option from the Options menu. The country selected during the initial use will automatically displayed in the menu. 7.4.4- Game Mode In the Options menu, you can set the Game Mode tab to On/Off by pressing the Right/ Left buttons. -
Page 25: Other Picture Features
to block from the Block Programme menu with Up/Down buttons and confirm with the GREEN button on your remote control. A lock symbol will appear next to the channel name. When a blocked channel is selected, the password screen will be displayed and the channel will not appear until the correct password is entered. -
Page 26: 8-Teletext
Teletext Being one of the most prominent services of broadcasting today, Teletext renders the TV more fruitful. Teletext means in short the transmission of various updated information along with the TV broadcast signal in the form of text and graphics. To be able to receive a quality teletext broadcast, a good antenna system and a broadcast signal that is not weak, with no reflections and interference... - Page 27 8.7-Temporary TV Picture (UPDATE) This button allows you to switch to the television picture while the page you want is being searched in the teletext broadcast eliminating the need to wait during the search. You may switch to the television picture by pressing the UPDATE button while Teletext is searching for your desired page.
-
Page 28: 9-External Equipment Connections
External Equipment Connections Your TV is equipped with 9 inputs including antenna input, which allows for the external device connection. These inputs are: 1-Aerial input 2-SCART input 3-AV input 4-S-Video input 5-PC input 6-HDMI1 input 7-HDMI2 input 8-YPbPr Component input 9-CI slot input You can connect your external device supporting the suitable inputs to your TV via these inputs. -
Page 29: Connecting External Equipment Via Av Connection
9.3-Connecting external equipment via AV connection Side view of the TV AV : To watch the picture of the broadcast device connected using the RCA (Phono) input, select AV option from the Source menu and press OK button. Your TV will switch to the selected source. -
Page 30: Connecting An External Device Via Hdmi Connection
9.6-Connecting an external device via HDMI connection Rear or side view of the TV HDMI: When a connection is made via HDMI socket, select the HDMI input through which you have made the connection from the Source menu and press the OK button. Your TV will switch to the selected source. -
Page 31: Inserting The Ci (Common Interface) Card
9.7.2-Switching to the PC mode For your LCD-TV to switch to the monitor (PC) mode, press the SOURCE button on your remote control. SOURCE menu will be displayed. Select PC by pressing the Up/Down movement buttons and press the OK button. 9.7.3-PC Access Setting Enter into the SETUP menu from the Main Menu by pressing the MENU button in the PC mode. -
Page 32: 10-Help And Tips
Help and tips Failure The television does not function Poor picture quality Shadow and reflection in the picture. No picture No colour. No or defective teletext No sound Remote control does not work Picture is not visible after turning on the TV If your television does not work properly even though you tried the above mentioned solutions, try turning it on and off again. -
Page 33: 11-Technical Specifications Chart
Technical Specifications Chart SCREEN SIZE 37”, 16:9 Active Panel type Sound output Power consumption Stand by power value SCART input Audio/Video Phono input S-Video socket HDMI input 1/2 YPBPR input VGA input PC Audio input CI Slot Input Dimensions (WxDxH) Weight (Kg) General technical specifications Power supply AC:... -
Page 34: 12-Main Uk Transmitter Stations
MAIN UK TRANSMITTER STATIONS UHF CHANNELS Regional Main stations BBCI BBC2 North West Caldbeck Winter Hill Douglas (IOM) North Belmont Emley Moor North East Bilsdale West Moor Chalton Pontop Pike Midlands (West) Ridge Hill Sutton Coldfield The Wreckin Mindlands (East) Waltham South West Beacon Hill... -
Page 35: 13-Guarantee And Service
• The cost of all functional replacement parts,excluding remote control batteries • The labour costs of a Beko approved repairer to carry out the repair • You may be offered a replacement instead of repair under guarantee. You dealer will advise you. - Page 36 HOW TO OBTAIN SERVICE Congratulations on your choice of a Beko colour television.Your new television has been designed and manufactured to the highest quality standards to give you many years of use.To get the best out of it,please take a few moments to read the instruction book.
- Page 37 Y4R.801...