Table of Contents
Advertisement
DETAILED CHANNEL SETTINGS
Motorized antenna setup (DiSEqC
1.2)
Note:
The LNB settings explained in the
7
section below requires expertise
in satellite systems. Contact your
authorized dealer about this matter.
Your television supports DiSEqC 1.2
motorized satellite systems. This feature
allows to control the satellite through your
television.
Adjust the satellite antenna position
according to each satellite. These settings
can be stored and the antenna can be
moved to a preset position.
1 Press »
« to open the menu.
p
<
>
2 Press »
« or »
»CHANNEL« menu and press »
confirm.
– »CHANNEL« menu is now enabled.
3 Select »Dish Antenna Setup« using
»
« or »
« and confirm with »
V
Λ
– »Dish Antenna Setup« menu will be
displayed.
>
4 Press »
« and then press »
to select »Motor«.
5 Select »DiSEqC 1.2« with »
6 Press » « (red) for Limit Settings
and press » «(yellow) for Position
Settings.
« to select the
« to
«.
« or »
V
Λ
<
>
« or »
Limit Setting
– »Move Motor«: Move the antenna in
the east or west direction with »
>
or »
«.
– »Move Step«: Move the antenna in
the east or west direction step by
step with »
– »Set West Limit«: Sets the limit that
the antenna can move at most in the
west direction.
– »Set East Limit«: Sets the limit that
the antenna can move at most in the
east direction.
– »Goto Reference«: Rotates the
antenna to the set reference point.
– »Disable Limit«: Disables the set
east and west limits.
Set Position
– »Move Motor«: Move the antenna in
the east or west direction with »
>
or »
«.
– »Move Step«: Move the antenna in
the east or west direction step by
step with »
– »Store Position»: Stores the position
of the antenna.
– »Goto Position«: Rotates the
«
antenna to the stored position.
– »Goto Reference«: Rotates the
antenna to the set reference point.
«.
7 Press »EXIT« to finish the setting.
EN / 40
- - --------------------------------------------
<
>
« or »
«.
<
>
« or »
«.
<
«
<
«
Advertisement
Table of Contents
