Motorized Antenna Setup (Diseqc 1.2) - Beko B32K 580 User Manual

DETAILED CHANNEL SETTINGS
Motorized antenna setup (DiS-
EqC 1.2)
Note:
The LNB settings explained in the section
7
below requires expertise in satellite systems.
Contact your authorized dealer about this
matter.
Your television supports DiSEqC 1.2 motorized
satellite systems. This feature allows to control
the satellite through your television.
Adjust the satellite antenna position according
to each satellite. These settings can be stored
and the antenna can be moved to a preset posi-
tion.
1 Press »MENU« to open the menu.
< >
2 Press »
« or »
menu and press »OK« to confirm.
– »CHANNEL« menu is now enabled.
3 Select »Dish Antenna Setup« using »
» « and confirm with »OK«.
Λ
– »Dish Antenna Setup« menu will be
displayed.
>
4 Press »
« and then press »
select »Motor«.
5 Select »DiSEqC 1.2« with »
6 Press » « (red) for Limit Settings and press
» «(yellow) for Position Settings.
46 / 57 TR
« to select the »CHANNEL«
V
« or » « to
V Λ
< >
« or » «.
----------------------------------------------------
Limit Setting
– »Move Motor«: Move the antenna in the
east or west direction with »
– »Move Step«: Move the antenna in the
east or west direction step by step with
<
» « or »
– »Set West Limit«: Sets the limit that the
antenna can move at most in the west
direction.
– »Set East Limit«: Sets the limit that the
antenna can move at most in the east
direction.
– »Goto Reference«: Rotates the antenna to
the set reference point.
– »Disable Limit«: Disables the set east and
west limits.
Set Position
– »Move Motor«: Move the antenna in the
east or west direction with »
– »Move Step«: Move the antenna in the
east or west direction step by step with
« or
<
» « or »
– »Store Position»: Stores the position of the
antenna.
– »Goto Position«: Rotates the antenna to
the stored position.
– »Goto Reference«: Rotates the antenna to
the set reference point.
7 Press »EXIT« to finish the setting.
<
« or »
>
«.
<
« or »
>
«.
Television / User Manual
>
«.
>
«.