Selecting A Source; Mute; Adjusting The Sound - Teufel Ultima 40 Active Technical Description And User Manual

Selecting a source

Push the SOURCE button (3) or the side button on
the remote control Puck control (23) multiple times to
consecutively select the audio sources.
The colour of the multicolour LED (1) will indicate the
active input in the process:
Blue Bluetooth ® mode (see page 15),
pulsing: waiting for the connection,
flashing: pairing mode.
Green Analogue audio input AUX IN (20).
Purple Optical digital audio input OPTICAL (10),
flashing: no connection.
White TV set via HDMI (9),
flashing: no connection.
Adjusting the volume
– Increase the volume: Turn the VOLUME control (13)
or the cover of the puck control (21) clockwise.
– Decrease the volume: Turn the VOLUME control
(13) or the cover of the remote control Puck control
(21) counterclockwise.
• In HDMI mode, the volume can also be adjusted
with the remote control of the TV set.
The multicolour LED (1) will flicker while the volume
is being adjusted. Once the lowest or highest volume
has been reached, the multicolour LED will light up for
approx. 1.5 seconds before going out.
The volume setting of an external player often
affects the volume of the Ultima 40 Active.

Mute

– By tapping the cover of the remote control
Puck control (21), you can turn the sound off and
on again.
The multicolour LED (1) will slowly pulse when
muting.
– The volume can also be adjusted to activate the
sound.

Adjusting the sound

– Use the TONE TREBLE control (11) to set the
high tones from "–10 dB" (decrease) to "+10 dB"
(increase).
– Use the TONE BASS control (12) to set the low
tones from "–10 dB" (decrease) to "+10 dB"
(increase).
3
23
13 12
• Ultima 40 Active
21
11
1
13