Table of Contents
Advertisement
USB charging port
You can use the USB CHARGING port ⑥
to charge a smartphone or operate a
Bluetooth or radio receiver. The device can
draw current of no more than 1.5 A in the
process.
Mains connection
The enclosed wall adapter is suitable for mains
voltages of 100 to 240 V~. Before using it for the
first time, push the Euro mains plug onto the mains
adapter until it locks into place (see graphic).
To replace the Euro mains plug, push the button
marked with "PUSH" and pull the plug off upwards.
1. Make sure that your MD16 has been turned off.
Do so by turning the control dial ② counterclock-
wise up to the stop.
2. Insert the small plug of the wall adapter in
the POWER jack ⑬.
3. Insert the wall adapter in a mains socket
(100 V–240 V ~, 50/60 Hz).
The MD16 is now operational.
⑥
②
⑬
• MD16
9
Advertisement
Table of Contents
